In the previous chapter, we selected a DC geared motor with an encoder from Pololu and the embedded board from Texas Instruments called Tiva C LaunchPad. We need the following components to interface the motor with Launchpad:
Two Pololu metal gear motors 37Dx57L mm with 64 count per revolution encoder
Pololu wheel 90x10 mm and a matching hub
Pololu dual VNH2SP30 motor driver carrier MD03A
A sealed lead acid/Lithium Ion battery of 12 V
A logic level convertor of 3.3 V to 5 V https://www.sparkfun.com/products/11978.
A Tiva C LaunchPad and its compatible interfacing wires
The following figure shows the interfacing circuit of two motors using Pololu H-Bridge:
Motor interfacing circuit
To interface with Launchpad, we have to connect a level shifter board in between these two. The motor driver works in 5 V but the Launchpad works in 3.3 V, so we have to connect a level shifter, as shown in the following figure:
Level shifter circuit
