Adding the body design
The first part of the body design is to create a space for one of the minifigs in the LEGO SPIKE Prime kit to sit and drive (or choose your own favorite minifig). The steps are as follows:
- Begin with a black 5x7 open frame and secure it to the purple 7x11 open frame closest to the Intelligent Hub, using four black connector pins:
Figure 6.31 – Attaching the black 5x7 open frame to the dragster frame
- Add another black 5x7 open frame to the same purple 7x11 open frame but secure it to the black open frame you just installed in the previous step, using two blue connector pins and a purple 5L beam between them:
Figure 6.32 – Adding the second black 5x7 open frame to the dragster frame
- Create four of these elements by combining a gray perpendicular connector pin and a yellow 3L beam:
Figure 6.33 – Make four of these elements
- Secure these four elements into the insides of the black 5x7 open frames. Additionally, add four black connector...
