Mastering Elasticsearch 5.x: Master the intricacies of Elasticsearch 5 and use it to create flexible and scalable search solutions , Third Edition

Apache Lucene writes all the information to the structure called the inverted index. It is a data structure that maps the terms in the index to the documents, not the other way round, as the relational database does. You can think of an inverted index as a data structure, where data is term oriented rather than document oriented.

Let's see how a simple inverted index can look. For example, let's assume that we have the documents with only the title field to be indexed, and they look like the following:

So, the index (in a very simple way) could be visualized as shown in the following table:

As you can see, each term points to the number of documents it is present in, along with its position. This allows for a very efficient and fast search such as term-based queries. In addition to this, each term has a number connected to it: the count, telling Lucene how often it occurs.

Each index is divided into multiple write once and read many times segments. When indexing, after a single segment is written to disk, it can't be updated. For example, the information about deleted documents is stored in a separate file, but the segment itself is not updated.

However, multiple segments can be merged together in a process called segments merge. After forcing, segments are merged, or after Lucene decides it is time for merging to be performed, segments are merged together by Lucene to create larger ones. This can be I/O demanding; however, it is needed to clean up some information because during that time some information that is not needed anymore is deleted; for example, the deleted documents. In addition to this, searching with the use of one larger segment is faster than searching against multiple smaller ones holding the same data.

Of course, the actual index created by Lucene is much more complicated and advanced, and consists of more than the terms, their counts, and documents, in which they are present. We would like to tell you about a few of these additional index pieces because even though they are internal, it is usually good to know about them, as they can be very useful.

A norm is a factor associated with each indexed document and stores normalization factors used to compute the score relative to the query. Norms are computed on the basis of index time boosts and are indexed along with the documents. With the use of norms, Lucene is able to provide an index time-boosting functionality at the cost of a certain amount of additional space needed for norms indexation and some amount of additional memory.

Term vectors are small inverted indices per document. They consist of pairs-a term and its frequency-and can optionally include information about the term position. By default, Lucene and Elasticsearch don't enable term vectors indexing, but some functionalities, such as the fast vector highlighting, require them to be present.

With the release of Lucene 4.0, the library introduced the so-called codec architecture, giving developers control over how the index files are written onto the disk. One of the parts of the index is the posting format, which stores fields, terms, documents, term positions and offsets, and, finally, the payloads (a byte array stored at an arbitrary position in the Lucene index, which can contain any information we want). Lucene contains different posting formats for different purposes; for example; one that is optimized for high cardinality fields such as the unique identifier.

As we have already mentioned, the Lucene index is the so-called inverted index. However, for certain features, such as aggregations, such an architecture is not the best one. The mentioned functionality operates on the document level and not the term level because Elasticsearch needs to uninvert the index before calculations can be done. Because of that, doc values were introduced and an additional structure was used for sorting and aggregations. The doc values store uninverted data for a field that they are turned on for. Both Lucene and Elasticsearch allow us to configure the implementation used to store them, giving us the possibility of memory-based doc values, disk-based doc values, and a combination of the two. Doc values are default in Elasticsearch since the 2.x release.

When we index a document into Elasticsearch, it goes through an analysis phase which is necessary in order to create the inverted indexes. It is a series of steps performed by Lucene which are depicted in following image:

Analysis is done by the analyzer, which is built of a tokenizer and zero or more filters, and can also have zero or more character filters.

A tokenizer in Lucene is used to divide the text into tokens, which are basically terms with additional information, such as its position in the original text and its length. The result of the tokenizer work is a so-called token stream, where the tokens are put one by one and are ready to be processed by filters.

Apart from the tokenizer, the Lucene analyzer is built of zero or more filters that are used to process tokens in the token stream. For example, it can remove tokens from the stream, change them, or even produce new ones. There are numerous filters and you can easily create new ones. Some examples of filters are as follows:

Filters are processed one after another, so we have almost unlimited analysis possibilities with adding multiple filters one after another.

The last thing is the character filtering, which is used before the tokenizer and is responsible for processing text before any analysis is done. One of the examples of the character filter is the HTML tags removal process.

This analysis phase is applied during query time also. However, you can also choose the other path and not analyze your queries. This is crucial to remember because some of the Elasticsearch queries are being analyzed and some are not. For example, the prefix query is not analyzed and the match query is analyzed.

What you should remember about indexing and querying analysis is that the index should be matched by the query term. If they don't match, Lucene won't return the desired documents. For example, if you are using stemming and lowercasing during indexing, you need to be sure that the terms in the query are also lowercased and stemmed, or your queries will return no results at all.

Some of the query types provided by Elasticsearch support Apache Lucene query parser syntax. Because of this, it is crucial to understand the Lucene query language.

A query is divided by Apache Lucene into terms and operators. A term, in Lucene, can be a single word or a phrase (a group of words surrounded by double quote characters). If the query is set to be analyzed, the defined analyzer will be used on each of the terms that form the query.

A query can also contain Boolean operators that connect terms to each other forming clauses. The list of Boolean operators is as follows:

In addition to these, we may use the following operators:

When not specifying any of the previous operators, the default OR operator will be used.

In addition to all these, there is one more thing: you can use parentheses to group clauses together; for example, with something like the following query:

 Elasticsearch AND (mastering OR book) 

Of course, just like in Elasticsearch, in Lucene all your data is stored in fields that build the document. In order to run a query against a field, you need to provide the field name, add the colon character, and provide the clause that should be run against that field. For example, if you would like to match documents with the term Elasticsearch in the title field, you would run the following query:

 title:Elasticsearch 

You can also group multiple clauses. For example, if you would like your query to match all the documents having the Elasticsearch term and the mastering book phrase in the title field, you could run a query like the following code:

 title:(+Elasticsearch +"mastering book") 

The previous query can also be expressed in the following way:

+title:Elasticsearch +title:"mastering book" 

In addition to the standard field query with a simple term or clause, Lucene allows us to modify the terms we pass in the query with modifiers. The most common modifiers, which you will be familiar with, are wildcards. There are two wildcards supported by Lucene, the ? and * terms. The first one will match any character and the second one will match multiple characters.

In addition to this, Lucene supports fuzzy and proximity searches with the use of the ~ character and an integer following it. When used with a single word term, it means that we want to search for terms that are similar to the one we've modified (the so-called fuzzy search). The integer after the ~ character specifies the maximum number of edits that can be done to consider the term similar. For example, if we would run a query, such as writer~2, both the terms writer and writers would be considered a match.

When the ~ character is used on a phrase, the integer number we provide is telling Lucene how much distance between the words is acceptable. For example, let's take the following query:

title:"mastering Elasticsearch" 

It would match the document with the title field containing mastering Elasticsearch, but not mastering book Elasticsearch. However, if we ran a query, such as title:"mastering Elasticsearch"~2, it would result in both example documents being matched.

We can also use boosting to increase our term importance by using the ^ character and providing a float number. Boosts lower than 1 would result in decreasing the document importance. Boosts higher than 1 would result in increasing the importance. The default boost value is 1. Please refer to the The changed default text scoring in Lucene - BM25 section in Chapter 2, The Improved Query DSL, for further information on what boosting is and how it is taken into consideration during document scoring.

In addition to all these, we can use square and curly brackets to allow range searching. For example, if we would like to run a range search on a numeric field, we could run the following query:

price:[10.00 TO 15.00] 

The preceding query would result in all documents with the price field between 10.00 and 15.00 inclusive.

In case of string-based fields, we also can run a range query; for example name:[Adam TO Adria].

The preceding query would result in all documents containing all the terms between Adam and Adria in the name field including them.

If you would like your range bound or bounds to be exclusive, use curly brackets instead of the square ones. For example, in order to find documents with the price field between 10.00 inclusive and 15.00 exclusive, we would run the following query:

price:[10.00 TO 15.00} 

If you would like your range bound from one side and not bound by the other, for example querying for documents with a price higher than 10.00, we would run the following query:

price:[10.00 TO *] 

In case you want to search for one of the special characters (which are +, -, &&, ||, !, (, ), { }, [ ], ^, ", ~, *, ?, :, \, /), you need to escape it with the use of the backslash (\) character. For example, to search for the abc"efg term you need to do something like abc"efg.

There are a few concepts that come with Elasticsearch, and their understanding is crucial to fully understand how Elasticsearch works and operates:

Elasticsearch uses the zen discovery module for cluster formation. In 1.x, multicast was the default discovery used in Elasticsearch, but in 2.x unicast became the default discovery type. Although, multicast was available in Elasticsearch 2.x as a plugin. Multicast support has completely been removed from Elasticsearch 5.0

When an Elasticsearch node starts, it performs discovery and searches for the list of unicast hosts (master eligible nodes), which are configured in the elasticsearch.yml configuration file using the discovery.zen.ping.unicast.hosts parameter. By default, the default list of unicast hosts is ["127.0.0.1", "[::1]"] so that each node, when starting, does not form a cluster only with itself. We will have a detailed section on zen discovery and node configurations in Chapter 8, Elasticsearch Administration.

Following are some of the most important features introduced in Elasticsearch version 5.0:

Apart from the features discussed just now, you can also benefit from all of the new features that came in Elasticsearch version 2.x. For those who have not had a look at the 2.x series, let's have a quick revamp of the new features which came with Elasticsearch under this series:

GET /_tasks 
GET /_tasks?nodes=nodeId1,nodeId2 
GET /_tasks?nodes=nodeId1&actions=cluster;* 

POST /_tasks/taskId1/_cancel

  curl -XGET 'localhost:9200/_search' -d '{ 
    "profile": true,  
    "query" : { 
      "match" : { "message" : "query profiling test" } 
    } 
  }' 

Elasticsearch version 2.x was focused on resiliency, reliability, simplification, and features. This release was based on Apache Lucene 5.x and specifically improves query execution and spatial search.

Version 2.x also delivers considerable improvements in index recovery. Historically, Elasticsearch index recovery was extremely painful, whether as part of node maintenance or an upgrade. The bigger the cluster, the bigger the headache. Node failures or a reboot can trigger a shard reallocation storm, and entire shards are sometimes copied over the network, despite having whole data. Users have also reported more than a day of recovery time to restart a single node.

With 2.x, recovery of existing replica shards became almost instant, and there is more lenient reallocation, which avoids reshuffling and makes rolling upgrades much easier and faster. Auto-regulating feedback loops in recent updates also eliminates past worries about merge throttling and related settings.

Elasticsearch 2.x also solved many of the known issues that plagued previous versions, including:

Elasticsearch developers earlier assumed an index as a database and a type as a table. This allowed users to create multiple types inside the same index, but eventually became a major source of issues because of restrictions imposed by Lucene.

Fields that have the same name inside multiple types in a single index are mapped to a single field inside Lucene. Incorrect query outcomes and index corruption can result from a field in one document type being of an integer type while a field in another document type being of a string type. Several other issues can lead to mapping refactoring and major restrictions on handling mapping conflicts.

The following are the most significant changes imposed by Elasticsearch version 2.x:

{ 
    "range": { 
      "created_at": { 
        "gte": "2017-02-28", 
        "lte": "2017-03-01" 
      } 
    } 
  } 

But in version 2.0 onwards, the same query must use the complete date time to get the same results. For example.

{ 
    "range": { 
      "created_at": { 
        "gte": "2017-02-28T00:00:00.000Z", 
        "lte": "2017-03-01T11:59:59.000Z" 
      } 
    } 
  } 

In addition, you can also use the date match operation in combination with date rounding to get the same results as following query:

{ 
    "range": { 
      "doc.created_at": { 
        "lte": "2017-02-28||+1d/d", 
        "gte": "2017-02-28", 
        "format": "strict_date_optional_time" 
      } 
    } 
  } 

Prior to version 2.0.0, Elasticsearch had two different objects for querying data: queries and filters. Each was different in functionality and performance.

Queries were used to find out how relevant a document was to a particular query by calculating a score for each document. Filters were used to match certain criteria and were cacheable to enable faster execution. This means that if a filter matched 1,000 documents, Elasticsearch, with the help of bloom filters, would cache those documents in memory to retrieve them quickly in case the same filter was executed again.

However, with the release of Lucene 5.0, which is used by Elasticsearch version 2.0.0, both queries and filters became the same internal object, taking care of both document relevance and matching.

So, an Elasticsearch query that used to look like the following:

{ 
"filtered" : { 
"query": { query definition }, 
"filter": { filter definition } 
 } 
} 

It should now be written like this in version 2.x:

{ 
"bool" : { 
"must": { query definition }, 
"filter": { filter definition } 
} 
} 

Additionally, the confusion caused by choosing between a bool filter and an and / or filter has been addressed with the elimination of and / or filters, and replaced by the bool query syntax in the preceding example. Rather than the unnecessary caching and memory requirements that often resulted from a wrong filter, Elasticsearch now tracks and optimizes frequently used filters and doesn't cache for segments with less than 10,000 documents or 3% of the index.

Starting from 2.x, Elasticsearch now runs under the Java Security Manager enabled by default, which streamlines permissions after startup.

Elasticsearch has applied a durable-by-default approach to reliability and data duplication across multiple nodes. Documents are now synced to disk before indexing requests are acknowledged, and all file renames are now atomic to prevent partially written files.

On the networking side, based on extensive feedback from system administrators, Elasticsearch removed multicasting, and the default zen discovery has been changed to unicast. Elasticsearch also now binds to the localhost by default, preventing unconfigured nodes from joining public networks.

Before version 2.0.0, Elasticsearch used the SIGAR library for operating system-dependent statistics. But SIGAR is no longer maintained, and it has been replaced in Elasticsearch by a reliance on stats provided by JVM. Accordingly, we see various changes in the monitoring parameters of the node info and node stats APIs:

From a user's perspective, changes under mappings are the most important changes to know because a wrong mapping will disallow index creation or can lead to unwanted search. Here are the most important changes under this category that you need to know.

      { 
         "content" : { 
            "type" : "string" 
         } 
      } 

        { 
          "content" : { 
            "type" : "text", 
            "fields" : { 
              "keyword" : { 
                "type" : "keyword", 
                "ignore_above" : 256 
              } 
            } 
          } 
        } 

      { 
            "content" : { 
              "type" : "string" 
            } 
      } 

      { 
            "content" : { 
              "type" : "keyword" 
            } 
      } 

Numeric fields are now indexed with a completely different data structure, called the BKD tree. This is expected to require less disk space and be faster for range queries. You can read the details at the following link:

https://www.elastic.co/blog/lucene-points-6.0

Similar to numeric fields, the geo_point field now also uses the new BKD tree structure and field parameters for geo_point fields are no longer supported: geohash, geohash_prefix, geohash_precision, and lat_lon. Geohashes are still supported from an API perspective, and can still be accessed using the .geohash field extension, but they are no longer used to index geo point data.

For example, in previous versions of Elasticsearch, the mapping of a geo_point field could look like the following:

"location":{ 
      "type": "geo_point", 
      "lat_lon": true, 
      "geohash": true, 
      "geohash_prefix": true, 
      "geohash_precision": "1m" 
} 

But, starting from Elasticsearch version 5.0, you can only create mapping of a geo_point field as shown in the following:

"location":{ 
      "type": "geo_point" 
    }  

The following are some very important additional changes you should be aware about:

curl -XPOST 'http://localhost:9200/test/_optimize?max_num_segments=5'

...should be converted to:

     curl -XPOST 'http://localhost:9200/test/_forcemerge?max_num_segments=5'
    

In addition to these changes, some major changes have been done in search, settings, allocation, merge, and scripting modules, along with cat and Java APIs, which we will cover in subsequent chapters.