(For more resources related to this topic, see here.)
Step 1 – Installing munin-node
First we need to connect to the server we want to monitor and install munin-node. In our examples, we will be using the name muninnode as the name of our additional server. Your server will probably have a different name, so every time you see muninnode in an example, you should replace that with the name of the server you are using. Examples will also use the term username, which you should replace with your username. But first, let's install munin-node.
For Debian or Ubuntu, use the following commands:
sudo apt-get install munin-node
For Red Hat or Fedora, use:
sudo yum install munin-node
Next, we will take a look at the generated configuration file. It is located at /etc/munin/ munin-node.conf. Please open it up in your favorite editor.
The first thing we have to take care of is the fact that we want our master to be able to connect to this node. For security reasons, munin-node defaults to allowing only connections from the localhost to query its data. So, let's scroll down to the allow section and add a line beneath it.
If your master has a static IP address, please enter it in the allow section in the following format:
This will grant the master at 10.0.0.200 access to the data of this node.
If your server has a dynamic IP or you want to trust your entire network range, you can either add a single line for every possible IP addresses or use a cidr_allow section. Please note that you can only use this if you have the Net::CIDR Perl module installed. Most systems will have this by default, but if you are having problems, you should check that.
This will grant anyone connecting from any IP from 10.0.0.0 to 10.0.0.255 to fetch all the information available in this node.
After you have done this, you need to save the file and restart the munin-node daemon.
For older versions of Debian or Ubuntu, use the following command:
sudo invoke-rc.d munin-node restart
For Debian or Ubuntu and Red Hat or Fedora, use:
sudo service munin-node restart
Step 2 – Testing your munin-node installation
Now that we have installed the node, it is a good idea to check if it functions correctly. We will do this by connecting to the node and fetching some information.
telnet localhost 4949
You should get the following output:
Welcome to muninnode
username@muninnode:~$ telnet muninnode 4949
Connected to localhost.
Escape character is '^]'.
# munin node at muninnode.
munins node on muninnode. version: 2.0.9-2
cpu df df_inode entropy forks fw_packets http_loadtime if_err_eth0
if_eth0 interrupts iostat iostat_ios irqstats load memory
munin_stats ntp_kernel_err ntp_kernel_pll_freq ntp_kernel_pll_off
ntp_offset open_files open_inodes proc_pri processes sensors swap
threads uptime users vmstat
Connection closed by foreign host.
Please note that the node might be a bit impatient with you. If you connect to it using Telnet and then give no further instructions for a few seconds, munin-node will automatically disconnect you, thinking you are just wasting it's time. If this happens, just go ahead and try again.
Now that we know that munin-node is running, we want to make sure it is functioning correctly. Munin-node keeps its log file at /var/log/munin/munin-node.log. Let's take a look at that.
You should be able to see your connection attempt in the log; it should look something like the following:
2013/01/01-12:30:10 CONNECT TCP Peer: "127.0.0.1:44363" Local: \
If you have a node that is experiencing problems with connections or a plugin, make sure to look at this log file for exceptions or error messages.
Step 3 – Installing additional plugins
When munin-node was installed, it ran its autodetect script to enable plugins from its standard library if they were applicable to your system. If you have installed new software on this machine, you can easily re-run this script to see if Munin can help you monitor the new software. If you, for example, have installed MySQL or PostgreSQL, then this is what you do:
sudo munin-node-configure --suggest
sudo munin-node-configure --shell
The first command will show you all the plugins your munin-node has out of the box and whether they apply to your system. The second command will display the commands you will have to execute to create the symbolic links in order to enable those suggestions. Please note that not all plugins support this, and therefore, not all applicable plugins will automatically be enabled.
Munin-node has to be restarted after you've added new plugins; otherwise, these changes will not take effect.
Step 4 – Adding the new node to the master
Now that we've completely configured the node and tested to see if it works, we are ready to add the node to our master. To do this, we have to go to our master and test whether we can connect back to our munin-node.
telnet 4949 muninnode
This should display the version and the capabilities of the munin-node running on the muninnode server. If this does not work, make sure you have started the munin-node on the muninnode server and also check whether firewalls allow you to connect to it on port 4949. Also go ahead and recheck the allowed IP addresses in the munin-node configuration as mentioned in step 2.
If this is working correctly, go ahead and open up the file at /etc/munin/munin.conf. Here, we scroll down until we see the following host tree:
# a simple host tree
We need to add our new munin-node to this host tree as follows:
# the host tree of our local network
Now, we'll have to wait at least 10 minutes before we will be able to see our new node on the Munin master's website. Go ahead and point your browser to your Munin master at http: //localhost/munin or at http://your_munin_master/munin; you should see something like the following screenshot:
After a couple of minutes, you should be able to see graphs for your node and even compare the nodes of your cluster side by side.
Now it could very well be possible that it isn't working for you. Here are the few steps you should check first:
Check the Munin master log at /var/log/munin/munin.log for errors.
Check the Munin node log at /var/log/munin/munin-node.log on the munin server for access calls and errors.
Try to connect from your Munin master to your node using Telnet 4949.
If you can connect, type nodes and check whether the name of your node is there.
Still in Telnet, type list munninnode.localdomain and check whether you get a list of plugins. If not, add your hostname to /etc/munin/munin-node.conf (see the Munin node configuration section).
We looked at the first step in expanding your munin cluster. Once you know how to add one server, you will be able to add all of them!
Resources for Article :
- Device Management in Zenoss Core Network and System Monitoring: Part 1 [Article]
- HP Network Node Manager 9: Understanding Smart Plug-Ins [Article]
- An Introduction to Flash Builder 4-Network Monitor [Article]