In this chapter, we will cover the following recipes:
- Installing the Tizen SDK
- Installing the Tizen SDK on Windows
- Installing the Tizen SDK on Mac OS
- Installing the Tizen SDK on Ubuntu
- Managing extension packages
- Customizing the Tizen IDE
- Setting the Active Secure profile
- Tizen Web Simulator
- Tizen Emulator
- Getting started with Smart Development Bridge
- Using Smart Development Bridge
This chapter offers an introduction to the tools required for the development of Tizen applications. Detailed descriptions of the steps required for the installation of the SDK on three supported operating systems (GNU/Linux, Windows, and Mac OS) are provided. Furthermore, this chapter contains an overview of the development environment, the Web Simulator, the device Emulator, and the user manual for Smart Development Bridge (SDB).
The first step of starting Tizen application development is to download the Tizen SDK and install it. The installation is similar on all supported operating systems. This recipe explains the basics of the installation process of Tizen SDK 2.2.1. Details and notes of each of the supported operating systems are discussed in the subsequent recipes of this chapter.
The SDK contains all the tools required for the development of both native and web Tizen applications. It consists of an IDE based on Eclipse, Emulator, Simulator for web applications, a tool chain, several sample applications, and full documentation. The Tizen SDK is compatible with the following platforms:
The minimum hardware requirements of the development systems are as follows:
Note
The Tizen SDK can be downloaded for free from the Tizen Project website at https://developer.tizen.org/downloads/tizen-sdk.
More details about the hardware requirements for the Tizen SDK are available at https://developer.tizen.org/downloads/sdk/installing-sdk/prerequisites-tizen-sdk.
Although officially Ubuntu is the only supported Linux distribution, some people have managed to make it work on other distributions such as Fedora and Arch Linux.
For network installation, please perform the following steps:
- Begin by downloading the Tizen SDK Install Manager.
- Launch the downloaded file and then click on Next on the first screen, as shown in the following screenshot:
- On the second screen, accept the terms and conditions and again click on Next.
- Select the components you want to install and click on Next. Finally, specify the directory where the SDK will be installed and click on the Install button.
If you prefer offline installation, then please follow these steps:
- Download the SDK Install Manager.
- When the download finishes, launch the downloaded file.
- Select Advanced.
- Go to the Advanced Configuration window. Click on the corresponding radio button for SDK Image.
- Browse to the SDK image file, click on OK, and after that, click on Next.
- On the next screen, the terms and conditions will be displayed. Click on Next after accepting them.
- Select the components you want to install and click on Next.
- Finally, choose the directory where the SDK will be stored and hit the Install button.
compatible with the following platforms:
The minimum hardware requirements of the development systems are as follows:
Note
The Tizen SDK can be downloaded for free from the Tizen Project website at https://developer.tizen.org/downloads/tizen-sdk.
More details about the hardware requirements for the Tizen SDK are available at https://developer.tizen.org/downloads/sdk/installing-sdk/prerequisites-tizen-sdk.
Although officially Ubuntu is the only supported Linux distribution, some people have managed to make it work on other distributions such as Fedora and Arch Linux.
For network installation, please perform the following steps:
- Begin by downloading the Tizen SDK Install Manager.
- Launch the downloaded file and then click on Next on the first screen, as shown in the following screenshot:
- On the second screen, accept the terms and conditions and again click on Next.
- Select the components you want to install and click on Next. Finally, specify the directory where the SDK will be installed and click on the Install button.
If you prefer offline installation, then please follow these steps:
- Download the SDK Install Manager.
- When the download finishes, launch the downloaded file.
- Select Advanced.
- Go to the Advanced Configuration window. Click on the corresponding radio button for SDK Image.
- Browse to the SDK image file, click on OK, and after that, click on Next.
- On the next screen, the terms and conditions will be displayed. Click on Next after accepting them.
- Select the components you want to install and click on Next.
- Finally, choose the directory where the SDK will be stored and hit the Install button.
network installation, please perform the following steps:
- Begin by downloading the Tizen SDK Install Manager.
- Launch the downloaded file and then click on Next on the first screen, as shown in the following screenshot:
- On the second screen, accept the terms and conditions and again click on Next.
- Select the components you want to install and click on Next. Finally, specify the directory where the SDK will be installed and click on the Install button.
If you prefer offline installation, then please follow these steps:
- Download the SDK Install Manager.
- When the download finishes, launch the downloaded file.
- Select Advanced.
- Go to the Advanced Configuration window. Click on the corresponding radio button for SDK Image.
- Browse to the SDK image file, click on OK, and after that, click on Next.
- On the next screen, the terms and conditions will be displayed. Click on Next after accepting them.
- Select the components you want to install and click on Next.
- Finally, choose the directory where the SDK will be stored and hit the Install button.
Tizen applications can be developed on Microsoft Windows even though Tizen is a Linux-based operating system. This recipe will reveal details of the installation process of the SDK on Windows.
One of the reasons a lot of mobile application developers use Mac OS is that it is required for the development of iOS applications. Unlike iOS, the development tools for Tizen do not have such limitations, and they can be installed on Mac OS as well as other popular desktop operating systems.
If you plan to develop native Tizen applications on Mac OS X, install command-line tools following the Apple guidelines for the version of Mac OS X that you are using (https://developer.apple.com/library/ios/technotes/tn2339/_index.html).
On Mac OS X 10.7.5 (also known as Mac OS X Lion) or later, the Install Manager might fail due to the security settings of the operating system. These settings have to be modified to temporarily prevent the Mac OS X Gatekeeper from blocking the Install Manager and to allow you to proceed with the Tizen SDK installation. Please perform the following steps to configure Gatekeeper on Mac OS X and to solve the issue:
- Click on the Apple Menu button in the upper-left corner of the main screen of the Mac OS X interface.
- Select System Preferences.
- Click on Security & Privacy.
- Select the General tab.
- To configure the settings, click on the locker icon in the lower-right corner, enter the administrative user's password, and click on Unlock.
- Set Allow apps download from to Anywhere and confirm the change.
- Launch the Tizen Install Manager again and complete the installation.
dmg
extension.
If you plan to develop native Tizen applications on Mac OS X, install command-line tools following the Apple guidelines for the version of Mac OS X that you are using (https://developer.apple.com/library/ios/technotes/tn2339/_index.html).
On Mac OS X 10.7.5 (also known as Mac OS X Lion) or later, the Install Manager might fail due to the security settings of the operating system. These settings have to be modified to temporarily prevent the Mac OS X Gatekeeper from blocking the Install Manager and to allow you to proceed with the Tizen SDK installation. Please perform the following steps to configure Gatekeeper on Mac OS X and to solve the issue:
- Click on the Apple Menu button in the upper-left corner of the main screen of the Mac OS X interface.
- Select System Preferences.
- Click on Security & Privacy.
- Select the General tab.
- To configure the settings, click on the locker icon in the lower-right corner, enter the administrative user's password, and click on Unlock.
- Set Allow apps download from to Anywhere and confirm the change.
- Launch the Tizen Install Manager again and complete the installation.
.dmg
file and launch it by following the provided instructions in the recipe Installing the Tizen SDK.
version of Mac OS X that you are using (https://developer.apple.com/library/ios/technotes/tn2339/_index.html).
On Mac OS X 10.7.5 (also known as Mac OS X Lion) or later, the Install Manager might fail due to the security settings of the operating system. These settings have to be modified to temporarily prevent the Mac OS X Gatekeeper from blocking the Install Manager and to allow you to proceed with the Tizen SDK installation. Please perform the following steps to configure Gatekeeper on Mac OS X and to solve the issue:
- Click on the Apple Menu button in the upper-left corner of the main screen of the Mac OS X interface.
- Select System Preferences.
- Click on Security & Privacy.
- Select the General tab.
- To configure the settings, click on the locker icon in the lower-right corner, enter the administrative user's password, and click on Unlock.
- Set Allow apps download from to Anywhere and confirm the change.
- Launch the Tizen Install Manager again and complete the installation.
Ubuntu is the only Linux distribution that is recommended and fully supported by the Tizen SDK. Additional software has to be installed prior to launching the Tizen SDK Install Manager on Ubuntu.
The full installation process can be divided into four milestones:
Visit tizen.org to get the Tizen SDK or just execute the following commands to download Tizen SDK 2.2.1 using your web browser or command-line tool such as wget
. For example, if you have a 32-bit version of Ubuntu, then you can run the following command in the terminal:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu32-v2.2.71.bin
The URL of the installation file for the 64-bit version is slightly different, so it can be downloaded by executing the following command:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu64-v2.2.71.bin
Oracle JRE must be installed before launching the Tizen SDK.Please note that OpenJDK is not supported. Please follow these steps if you do not have Oracle JRE installed:
- Visit the Oracle website and, depending on the version of Ubuntu that you are using, download the 32-bit or 64-bit JRE 7 for Linux as a
tar
archive available at http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html. - Decompress all files from the downloaded
archive.tar -xzf jre-*.tar.gz
file. - Create a directory for the JRE files. After that, move the extracted files into the directory by executing the following command:
sudo mkdir -p /usr/lib/jvm/jre1.7.0sudo mv jre1.7.0_45/* /usr/lib/jvm/jre1.7.0/.
- If Java is not present, please install it. Otherwise, it is recommended that you update it by using the following command:
sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jre1.7.0/bin/java 0
Ensure that the following packages are installed:
Users of Ubuntu 12.10 or any older version should install the package gksudo
as well by executing the following command:
If you are unsure which install type is appropriate for your needs, it is recommended that you select Typical.
In this section, you will learn how to troubleshoot your GNU/Linux installation of Tizen.
- Unable to launch the Tizen IDE due to missing or incompatible version of JRE (SDK runs on Eclipse, which requires JRE, JRE 6, or a newer package is required).
If you encounter such a problem, please make sure that an appropriate JRE version has been installed on the development system before launching the installer of the Tizen SDK.
- Unable to run the installation due to missing packages (Missing "expect" "gtk2-engines-pixbuf" "libgnome2-0" "qemu-user-static" "libwebkitgtk-1.0-0" package(s)).
If you encounter such a problem, please install the missing packages using the shell command
apt-get
. - Problem with installing Oracle Java on an Ubuntu machine.
If you encounter such a problem, install
java-package
. Then, convert the downloaded Oracle JDK/JRE archive into a.deb
file. - Exception when Eclipse is launched (Exception in thread "main" org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)] error pops up).
If you encounter such a problem, please install the
libwebkitgtk-1.0-0
package usingapt-get
. - The Tizen IDE does not display the Event Injector.
If you encounter such a problem, make sure that the Ajax Tool Framework plugin for Eclipse is installed.
- Vertical scroll bars are not shown properly.
To disable the overlay scrollbar in the latest versions of Ubuntu, execute the following command:
>gsettings set com.canonical.desktop.interface scrollbar-mode normal
- SDB not working on Ubuntu 13.10 64-bit (sdb: error while loading shared libraries: libudev.so.0: cannot open shared object file: No such file or directory).
If you encounter such a problem, apply the following workaround for Ubuntu 13.10 64-bit at your own risk to temporarily solve the issue until an update of the SDK is available:
- Please refer to the Getting started with Smart Development Bridge recipe about SDB if you are interested in registering SDB as a global command.
- For up-to-date information, please refer to the Tizen wiki article Install Tizen SDK on Ubuntu, which has been maintained by the author of this book since March 26, 2013 at https://wiki.tizen.org/wiki/Install_Tizen_SDK_on_Ubuntu.
libudev.so.1
should be applied to run SDB. Please check the troubleshooting section of the recipe for more information about fixing SDB on Ubuntu 13.10.
The full installation process can be divided into four milestones:
Visit tizen.org to get the Tizen SDK or just execute the following commands to download Tizen SDK 2.2.1 using your web browser or command-line tool such as wget
. For example, if you have a 32-bit version of Ubuntu, then you can run the following command in the terminal:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu32-v2.2.71.bin
The URL of the installation file for the 64-bit version is slightly different, so it can be downloaded by executing the following command:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu64-v2.2.71.bin
Oracle JRE must be installed before launching the Tizen SDK.Please note that OpenJDK is not supported. Please follow these steps if you do not have Oracle JRE installed:
- Visit the Oracle website and, depending on the version of Ubuntu that you are using, download the 32-bit or 64-bit JRE 7 for Linux as a
tar
archive available at http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html. - Decompress all files from the downloaded
archive.tar -xzf jre-*.tar.gz
file. - Create a directory for the JRE files. After that, move the extracted files into the directory by executing the following command:
sudo mkdir -p /usr/lib/jvm/jre1.7.0sudo mv jre1.7.0_45/* /usr/lib/jvm/jre1.7.0/.
- If Java is not present, please install it. Otherwise, it is recommended that you update it by using the following command:
sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jre1.7.0/bin/java 0
Ensure that the following packages are installed:
Users of Ubuntu 12.10 or any older version should install the package gksudo
as well by executing the following command:
If you are unsure which install type is appropriate for your needs, it is recommended that you select Typical.
In this section, you will learn how to troubleshoot your GNU/Linux installation of Tizen.
- Unable to launch the Tizen IDE due to missing or incompatible version of JRE (SDK runs on Eclipse, which requires JRE, JRE 6, or a newer package is required).
If you encounter such a problem, please make sure that an appropriate JRE version has been installed on the development system before launching the installer of the Tizen SDK.
- Unable to run the installation due to missing packages (Missing "expect" "gtk2-engines-pixbuf" "libgnome2-0" "qemu-user-static" "libwebkitgtk-1.0-0" package(s)).
If you encounter such a problem, please install the missing packages using the shell command
apt-get
. - Problem with installing Oracle Java on an Ubuntu machine.
If you encounter such a problem, install
java-package
. Then, convert the downloaded Oracle JDK/JRE archive into a.deb
file. - Exception when Eclipse is launched (Exception in thread "main" org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)] error pops up).
If you encounter such a problem, please install the
libwebkitgtk-1.0-0
package usingapt-get
. - The Tizen IDE does not display the Event Injector.
If you encounter such a problem, make sure that the Ajax Tool Framework plugin for Eclipse is installed.
- Vertical scroll bars are not shown properly.
To disable the overlay scrollbar in the latest versions of Ubuntu, execute the following command:
>gsettings set com.canonical.desktop.interface scrollbar-mode normal
- SDB not working on Ubuntu 13.10 64-bit (sdb: error while loading shared libraries: libudev.so.0: cannot open shared object file: No such file or directory).
If you encounter such a problem, apply the following workaround for Ubuntu 13.10 64-bit at your own risk to temporarily solve the issue until an update of the SDK is available:
- Please refer to the Getting started with Smart Development Bridge recipe about SDB if you are interested in registering SDB as a global command.
- For up-to-date information, please refer to the Tizen wiki article Install Tizen SDK on Ubuntu, which has been maintained by the author of this book since March 26, 2013 at https://wiki.tizen.org/wiki/Install_Tizen_SDK_on_Ubuntu.
tizen.org to get the Tizen SDK or just execute the following commands to download Tizen SDK 2.2.1 using your web browser or command-line tool such as wget
. For example, if you have a 32-bit version of Ubuntu, then you can run the following command in the terminal:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu32-v2.2.71.bin
The URL of the installation file for the 64-bit version is slightly different, so it can be downloaded by executing the following command:
wget https://cdn.download.tizen.org/sdk/InstallManager/tizen-sdk-2.2.1/tizen-sdk-ubuntu64-v2.2.71.bin
Oracle JRE must be installed before launching the Tizen SDK.Please note that OpenJDK is not supported. Please follow these steps if you do not have Oracle JRE installed:
- Visit the Oracle website and, depending on the version of Ubuntu that you are using, download the 32-bit or 64-bit JRE 7 for Linux as a
tar
archive available at http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html. - Decompress all files from the downloaded
archive.tar -xzf jre-*.tar.gz
file. - Create a directory for the JRE files. After that, move the extracted files into the directory by executing the following command:
sudo mkdir -p /usr/lib/jvm/jre1.7.0sudo mv jre1.7.0_45/* /usr/lib/jvm/jre1.7.0/.
- If Java is not present, please install it. Otherwise, it is recommended that you update it by using the following command:
sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jre1.7.0/bin/java 0
Ensure that the following packages are installed:
Users of Ubuntu 12.10 or any older version should install the package gksudo
as well by executing the following command:
If you are unsure which install type is appropriate for your needs, it is recommended that you select Typical.
In this section, you will learn how to troubleshoot your GNU/Linux installation of Tizen.
- Unable to launch the Tizen IDE due to missing or incompatible version of JRE (SDK runs on Eclipse, which requires JRE, JRE 6, or a newer package is required).
If you encounter such a problem, please make sure that an appropriate JRE version has been installed on the development system before launching the installer of the Tizen SDK.
- Unable to run the installation due to missing packages (Missing "expect" "gtk2-engines-pixbuf" "libgnome2-0" "qemu-user-static" "libwebkitgtk-1.0-0" package(s)).
If you encounter such a problem, please install the missing packages using the shell command
apt-get
. - Problem with installing Oracle Java on an Ubuntu machine.
If you encounter such a problem, install
java-package
. Then, convert the downloaded Oracle JDK/JRE archive into a.deb
file. - Exception when Eclipse is launched (Exception in thread "main" org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)] error pops up).
If you encounter such a problem, please install the
libwebkitgtk-1.0-0
package usingapt-get
. - The Tizen IDE does not display the Event Injector.
If you encounter such a problem, make sure that the Ajax Tool Framework plugin for Eclipse is installed.
- Vertical scroll bars are not shown properly.
To disable the overlay scrollbar in the latest versions of Ubuntu, execute the following command:
>gsettings set com.canonical.desktop.interface scrollbar-mode normal
- SDB not working on Ubuntu 13.10 64-bit (sdb: error while loading shared libraries: libudev.so.0: cannot open shared object file: No such file or directory).
If you encounter such a problem, apply the following workaround for Ubuntu 13.10 64-bit at your own risk to temporarily solve the issue until an update of the SDK is available:
- Please refer to the Getting started with Smart Development Bridge recipe about SDB if you are interested in registering SDB as a global command.
- For up-to-date information, please refer to the Tizen wiki article Install Tizen SDK on Ubuntu, which has been maintained by the author of this book since March 26, 2013 at https://wiki.tizen.org/wiki/Install_Tizen_SDK_on_Ubuntu.
your GNU/Linux installation of Tizen.
- Unable to launch the Tizen IDE due to missing or incompatible version of JRE (SDK runs on Eclipse, which requires JRE, JRE 6, or a newer package is required).
If you encounter such a problem, please make sure that an appropriate JRE version has been installed on the development system before launching the installer of the Tizen SDK.
- Unable to run the installation due to missing packages (Missing "expect" "gtk2-engines-pixbuf" "libgnome2-0" "qemu-user-static" "libwebkitgtk-1.0-0" package(s)).
If you encounter such a problem, please install the missing packages using the shell command
apt-get
. - Problem with installing Oracle Java on an Ubuntu machine.
If you encounter such a problem, install
java-package
. Then, convert the downloaded Oracle JDK/JRE archive into a.deb
file. - Exception when Eclipse is launched (Exception in thread "main" org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)] error pops up).
If you encounter such a problem, please install the
libwebkitgtk-1.0-0
package usingapt-get
. - The Tizen IDE does not display the Event Injector.
If you encounter such a problem, make sure that the Ajax Tool Framework plugin for Eclipse is installed.
- Vertical scroll bars are not shown properly.
To disable the overlay scrollbar in the latest versions of Ubuntu, execute the following command:
>gsettings set com.canonical.desktop.interface scrollbar-mode normal
- SDB not working on Ubuntu 13.10 64-bit (sdb: error while loading shared libraries: libudev.so.0: cannot open shared object file: No such file or directory).
If you encounter such a problem, apply the following workaround for Ubuntu 13.10 64-bit at your own risk to temporarily solve the issue until an update of the SDK is available:
- Please refer to the Getting started with Smart Development Bridge recipe about SDB if you are interested in registering SDB as a global command.
- For up-to-date information, please refer to the Tizen wiki article Install Tizen SDK on Ubuntu, which has been maintained by the author of this book since March 26, 2013 at https://wiki.tizen.org/wiki/Install_Tizen_SDK_on_Ubuntu.
Tizen is an open source software platform and it is very flexible. Third-party individual developers or companies can develop extension packages for the Tizen SDK. Other developers can use and abuse third-party packages in their applications using specific repositories. Some extensions for the Tizen SDK are available at https://developer.tizen.org/downloads/add-on-sdks.
Please perform the following steps to add extra repositories and install additional packages:
- Launch the Tizen SDK Install Manager.
- Click on Next to proceed.
- Select Extra Repository to open a dialog.
- Click on Add.
- Set an external server as well as the name of a repository and click on OK. The repository information will be displayed in the previous window. Click on OK again.
- Select the required packages and click on Install.
Perform the following actions to remove an extra repository and all packages installed from it:
Each repository contains additional packages that are optional and can be added or deleted by the developer at any time. A repository is specified by a URL, so it is mandatory to have a network connection to the repository's server to download any of its packages. If you are experiencing issues connecting to a repository using HTTP Secure (HTTPS), you can try using the same URL with HTTP.
Each repository contains additional packages that are optional and can be added or deleted by the developer at any time. A repository is specified by a URL, so it is mandatory to have a network connection to the repository's server to download any of its packages. If you are experiencing issues connecting to a repository using HTTP Secure (HTTPS), you can try using the same URL with HTTP.
The default and recommended IDE that is included in the Tizen SDK is based on Eclipse. Eclipse is an open source software, and through the years it has become a de facto standard for the development of applications for mobile platforms. Developers with experience in Android, Bada, Symbian, and BlackBerry 10 are already familiar with Eclipse as it, or IDEs based on it, is used for application development for these platforms.
Note
Android developers should note that there is a difference in the way Eclipse is provided for Tizen compared to Android. Android Development Tools (ADT) is a plugin for Eclipse that can be downloaded and installed. Unlike ADT, the Tizen IDE is provided in the Tizen SDK bundle, and at the moment, a separate plugin is not available.
A welcome screen will be displayed on the first start screen of the Tizen IDE. Click on Workbench to open the Tizen Web perspective and start developing applications. If you want to have a look at the documentation, select any of the other three options. You can get back to the home screen at any time by navigating to Help | Welcome. If you are searching for Tizen's official development documentation, just navigate to Help | Help Contents.
Execute the following actions to change the background color of the text editor:
Perform the following steps if you want to change the fonts:
These are the most popular and important views in the Tizen IDE:
- Project Explorer View: This view shows all resources in the current workspace. From the Project Explorer View, you can manage projects, open and edit files, and execute operations such as building packaging and signing and validating widgets or applications. Right-click inside this view to open a context menu with all options. If the Project Explorer View is missing from the current perspective of the Tizen IDE, you can add it by selecting Window | Show View | Other... | General | Project Explorer.
- Properties View: This view shows the name and the basic properties of a selected resource. To view more details about a resource, right-click on it and select Properties. To add it to the current perspective of the Tizen IDE, navigate to Window | Show View | Other… | General | Properties.
- Log View: This is a vital tool to track bugs and investigate the behavior of applications running on the Tizen Emulator or a device connected to the development system. Log messages are displayed within Log View while an application is running. The following message types are supported:
verbose
,debug
,info
,warning
,error
, andfatal
. The log output can be configured to filter only specific message types using the V, D, Z, I, W, E, and F software buttons. Next to them are situated the buttons for additional tabs for logging with more filtering options that can be added, edited, and removed. An option to export logs is also available. If Log View is not visible, enable it by activating the following option, Window | Show View | Log. - Console View: This view offers several types of consoles that are useful during the deployment and debugging of Tizen applications. If the console is not visible, navigate to Window | Show View | Console to add it to the current perspective of the Tizen IDE. To change the settings of the console, go to Window | Preferences | Run/Debug | Console.
- Connection Explorer View: The list of connected devices and emulators is displayed at this view. It provides options for exploring their filesystems and transferring files. Select an item from the list and right-click on the item to see a menu with all available actions. To add the Connection Explorer to the current perspective of the Tizen IDE, navigate to Window | Show View | Other... | Tizen.
Execute the following actions to change the background color of the text editor:
Perform the following steps if you want to change the fonts:
These are the most popular and important views in the Tizen IDE:
- Project Explorer View: This view shows all resources in the current workspace. From the Project Explorer View, you can manage projects, open and edit files, and execute operations such as building packaging and signing and validating widgets or applications. Right-click inside this view to open a context menu with all options. If the Project Explorer View is missing from the current perspective of the Tizen IDE, you can add it by selecting Window | Show View | Other... | General | Project Explorer.
- Properties View: This view shows the name and the basic properties of a selected resource. To view more details about a resource, right-click on it and select Properties. To add it to the current perspective of the Tizen IDE, navigate to Window | Show View | Other… | General | Properties.
- Log View: This is a vital tool to track bugs and investigate the behavior of applications running on the Tizen Emulator or a device connected to the development system. Log messages are displayed within Log View while an application is running. The following message types are supported:
verbose
,debug
,info
,warning
,error
, andfatal
. The log output can be configured to filter only specific message types using the V, D, Z, I, W, E, and F software buttons. Next to them are situated the buttons for additional tabs for logging with more filtering options that can be added, edited, and removed. An option to export logs is also available. If Log View is not visible, enable it by activating the following option, Window | Show View | Log. - Console View: This view offers several types of consoles that are useful during the deployment and debugging of Tizen applications. If the console is not visible, navigate to Window | Show View | Console to add it to the current perspective of the Tizen IDE. To change the settings of the console, go to Window | Preferences | Run/Debug | Console.
- Connection Explorer View: The list of connected devices and emulators is displayed at this view. It provides options for exploring their filesystems and transferring files. Select an item from the list and right-click on the item to see a menu with all available actions. To add the Connection Explorer to the current perspective of the Tizen IDE, navigate to Window | Show View | Other... | Tizen.
These are the most popular and important views in the Tizen IDE:
- Project Explorer View: This view shows all resources in the current workspace. From the Project Explorer View, you can manage projects, open and edit files, and execute operations such as building packaging and signing and validating widgets or applications. Right-click inside this view to open a context menu with all options. If the Project Explorer View is missing from the current perspective of the Tizen IDE, you can add it by selecting Window | Show View | Other... | General | Project Explorer.
- Properties View: This view shows the name and the basic properties of a selected resource. To view more details about a resource, right-click on it and select Properties. To add it to the current perspective of the Tizen IDE, navigate to Window | Show View | Other… | General | Properties.
- Log View: This is a vital tool to track bugs and investigate the behavior of applications running on the Tizen Emulator or a device connected to the development system. Log messages are displayed within Log View while an application is running. The following message types are supported:
verbose
,debug
,info
,warning
,error
, andfatal
. The log output can be configured to filter only specific message types using the V, D, Z, I, W, E, and F software buttons. Next to them are situated the buttons for additional tabs for logging with more filtering options that can be added, edited, and removed. An option to export logs is also available. If Log View is not visible, enable it by activating the following option, Window | Show View | Log. - Console View: This view offers several types of consoles that are useful during the deployment and debugging of Tizen applications. If the console is not visible, navigate to Window | Show View | Console to add it to the current perspective of the Tizen IDE. To change the settings of the console, go to Window | Preferences | Run/Debug | Console.
- Connection Explorer View: The list of connected devices and emulators is displayed at this view. It provides options for exploring their filesystems and transferring files. Select an item from the list and right-click on the item to see a menu with all available actions. To add the Connection Explorer to the current perspective of the Tizen IDE, navigate to Window | Show View | Other... | Tizen.
- Project Explorer View: This view shows all resources in the current workspace. From the Project Explorer View, you can manage projects, open and edit files, and execute operations such as building packaging and signing and validating widgets or applications. Right-click inside this view to open a context menu with all options. If the Project Explorer View is missing from the current perspective of the Tizen IDE, you can add it by selecting Window | Show View | Other... | General | Project Explorer.
- Properties View: This view shows the name and the basic properties of a selected resource. To view more details about a resource, right-click on it and select Properties. To add it to the current perspective of the Tizen IDE, navigate to Window | Show View | Other… | General | Properties.
- Log View: This is a vital tool to track bugs and investigate the behavior of applications running on the Tizen Emulator or a device connected to the development system. Log messages are displayed within Log View while an application is running. The following message types are supported:
verbose
,debug
,info
,warning
,error
, andfatal
. The log output can be configured to filter only specific message types using the V, D, Z, I, W, E, and F software buttons. Next to them are situated the buttons for additional tabs for logging with more filtering options that can be added, edited, and removed. An option to export logs is also available. If Log View is not visible, enable it by activating the following option, Window | Show View | Log. - Console View: This view offers several types of consoles that are useful during the deployment and debugging of Tizen applications. If the console is not visible, navigate to Window | Show View | Console to add it to the current perspective of the Tizen IDE. To change the settings of the console, go to Window | Preferences | Run/Debug | Console.
- Connection Explorer View: The list of connected devices and emulators is displayed at this view. It provides options for exploring their filesystems and transferring files. Select an item from the list and right-click on the item to see a menu with all available actions. To add the Connection Explorer to the current perspective of the Tizen IDE, navigate to Window | Show View | Other... | Tizen.
It is mandatory to create and set a secure profile in order to successfully deploy and debug applications on a Tizen device. My personal observation is that a lot of developers experience issues due to the secure profile when they are deploying an application on a device for the first time. This recipe explains a couple of ways to generate a certificate and set it on the Tizen IDE.
If an Active Secure profile is not set, the following error message will be displayed on the screen when you try to run an application on a device or emulator from the Tizen IDE:
The recommended way is to generate a certificate through the Tizen IDE. The steps are as follows:
- Launch a terminal and navigate to the directory
<Tizen SDK install directory>/tools/certificate-generator
/. - If you are working on a Unix-like operating system, such as Mac OS or Linux, execute
certificate-generator.sh
. If you are using Windows, you should runcertificate-generator.bat
. - You will be prompted to type the information about the certificate. After filling in all details, the certificate will be generated.
- Launch the Tizen IDE because the generated certificate has to be set in it.
- Navigate to Window | Preferences.
- Navigate to Tizen SDK | Security Profiles.
- Click on the Add button.
- Enter a name for the profile.
- Type in the path to the certificate's file.
- Finally, click on the OK button to save all settings.
The creation process of the certificate is similar no matter which approach or operating system you prefer to use. Both the batch file for Windows and the bash script for Linux and Mac OS run CertificateGenerator.jar
through the java -jar
command. This tool is written in Java and its file format is
Java archive (JAR). The advantage of using Java for these kinds of applications is the multiplatform compatibility of Java, as the same code works on any of the operating systems supported by the Tizen SDK: Linux, Mac OS, and Windows.
The recommended way is to generate a certificate through the Tizen IDE. The steps are as follows:
- Launch a terminal and navigate to the directory
<Tizen SDK install directory>/tools/certificate-generator
/. - If you are working on a Unix-like operating system, such as Mac OS or Linux, execute
certificate-generator.sh
. If you are using Windows, you should runcertificate-generator.bat
. - You will be prompted to type the information about the certificate. After filling in all details, the certificate will be generated.
- Launch the Tizen IDE because the generated certificate has to be set in it.
- Navigate to Window | Preferences.
- Navigate to Tizen SDK | Security Profiles.
- Click on the Add button.
- Enter a name for the profile.
- Type in the path to the certificate's file.
- Finally, click on the OK button to save all settings.
The creation process of the certificate is similar no matter which approach or operating system you prefer to use. Both the batch file for Windows and the bash script for Linux and Mac OS run CertificateGenerator.jar
through the java -jar
command. This tool is written in Java and its file format is
Java archive (JAR). The advantage of using Java for these kinds of applications is the multiplatform compatibility of Java, as the same code works on any of the operating systems supported by the Tizen SDK: Linux, Mac OS, and Windows.
generate a certificate through the Tizen IDE. The steps are as follows:
- Launch a terminal and navigate to the directory
<Tizen SDK install directory>/tools/certificate-generator
/. - If you are working on a Unix-like operating system, such as Mac OS or Linux, execute
certificate-generator.sh
. If you are using Windows, you should runcertificate-generator.bat
. - You will be prompted to type the information about the certificate. After filling in all details, the certificate will be generated.
- Launch the Tizen IDE because the generated certificate has to be set in it.
- Navigate to Window | Preferences.
- Navigate to Tizen SDK | Security Profiles.
- Click on the Add button.
- Enter a name for the profile.
- Type in the path to the certificate's file.
- Finally, click on the OK button to save all settings.
The creation process of the certificate is similar no matter which approach or operating system you prefer to use. Both the batch file for Windows and the bash script for Linux and Mac OS run CertificateGenerator.jar
through the java -jar
command. This tool is written in Java and its file format is
Java archive (JAR). The advantage of using Java for these kinds of applications is the multiplatform compatibility of Java, as the same code works on any of the operating systems supported by the Tizen SDK: Linux, Mac OS, and Windows.
batch file for Windows and the bash script for Linux and Mac OS run CertificateGenerator.jar
through the java -jar
command. This tool is written in Java and its file format is
Java archive (JAR). The advantage of using Java for these kinds of applications is the multiplatform compatibility of Java, as the same code works on any of the operating systems supported by the Tizen SDK: Linux, Mac OS, and Windows.
Tizen Web Simulator is a simplified tool to test and debug web applications. It is included in the Tizen SDK. Web Simulator is available under Apache Software License v.2.0 because it is based on the Ripple-UI Framework, which was initially developed by BlackBerry (known in the past as research in motion) to test BB10 HTML5 WebWorks applications. Web Simulator offers the following features:
- Guest modifications that provide a JavaScript backend that simulates Tizen Web APIs
- Configuration panes to emit events and messages related to the geolocation, sensors, acceleration, and messaging capabilities of the Tizen software platform
- Customization of the behavior of the simulator via a variety of preferences
- Please refer to the recipes in Chapter 11, Debugging Apps in Tizen, to learn how to simulate events and debug applications using the Web Simulator.
- Please refer to the recipes in Chapter 11, Debugging Apps in Tizen, to learn how to simulate events and debug applications using the Web Simulator.
- Please refer to the recipes in Chapter 11, Debugging Apps in Tizen, to learn how to simulate events and debug applications using the Web Simulator.
config.xml
when the web application is launched. By default, the name of the file is index.html
.
- Please refer to the recipes in Chapter 11, Debugging Apps in Tizen, to learn how to simulate events and debug applications using the Web Simulator.
- Chapter 11, Debugging Apps in Tizen, to learn how to simulate events and debug applications using the Web Simulator.
The device Emulator is a virtual machine based on the open source project Quick Emulator (QEMU). It provides full stacks of the Tizen platform. Emulator Manager and Event Injector are also provided among the Emulator tools of the SDK. Unlike the simulator, the emulator provides strict implementation of the device specifications and there are no guest modifications. Please note that Tizen SDK 2.2.1 supports only the x86 machine architecture for guests.
QEMU, the engine behind the Tizen Emulator, is an open source project for a visualization machine that allows you to run a separate operating system as just another task on the desktop of your development machine. The Android emulator is also based on QEMU. For more information about QEMU and details regarding its licenses, please visit http://wiki.qemu.org/.
The Tizen Emulator supports a variety of features, and the most important features are as follows:
- Input system: The emulator provides a virtual touchscreen and its drivers are different from the ones for the physical devices.
- Virtual sensor: Values related to acceleration, light, gyroscope, proximity, motion, location, and battery are received through the Event Injector.
- Telephony: Voice calls, call waiting, outgoing call barring, and messaging are supported through the Event Injector. Video calls, call forwarding, incoming call barring, emulator-to-emulator calls, and SMS are not supported.
- Power management: The emulator offers internal implementation to turn on and off the display.
- Supported media formats and codes: Encoding of H.264 and decoding of AAC+, enhanced AAC+, and FLAC are not supported on the emulator.
Please ensure that you are running the Tizen Emulator on a computer with a minimum screen resolution of 1280 x 1024 pixels and the latest version of graphical drivers with OpenGL support. It is recommended to use an Intel CPU with Virtualization Technology (VTx). The performance of the emulator depends on the hardware of the computer and it might work slowly on low resource machines. Details about the requirements for the Tizen Emulator are available at https://developer.tizen.org/downloads/sdk/installing-sdk/prerequisites-tizen-sdk.
To create new instances of the Tizen Emulator, launch the Emulator Manager and click on the button with the label Create New VM.
Both skin options such as the height and width of the resolution as well as various QEMU options can be specified as arguments of the command. For details of the supported options, please check the user manual in the official Tizen SDK 2.2.1 development documentation:
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/emulator_startup_options.htm
- You can communicate with the running Tizen emulator using Smart Development Bridge (SDB). For more information and details, please check the next recipe. Descriptions and examples of deploying and running applications on the emulator as well as simulating events with the Event Injector are available in Chapter 11, Debugging Apps in Tizen.
Virtualization Technology (VTx). The performance of the emulator depends on the hardware of the computer and it might work slowly on low resource machines. Details about the requirements for the Tizen Emulator are available at https://developer.tizen.org/downloads/sdk/installing-sdk/prerequisites-tizen-sdk.
To create new instances of the Tizen Emulator, launch the Emulator Manager and click on the button with the label Create New VM.
Both skin options such as the height and width of the resolution as well as various QEMU options can be specified as arguments of the command. For details of the supported options, please check the user manual in the official Tizen SDK 2.2.1 development documentation:
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/emulator_startup_options.htm
- You can communicate with the running Tizen emulator using Smart Development Bridge (SDB). For more information and details, please check the next recipe. Descriptions and examples of deploying and running applications on the emulator as well as simulating events with the Event Injector are available in Chapter 11, Debugging Apps in Tizen.
Tizen Emulator, launch the Emulator Manager and click on the button with the label Create New VM.
Both skin options such as the height and width of the resolution as well as various QEMU options can be specified as arguments of the command. For details of the supported options, please check the user manual in the official Tizen SDK 2.2.1 development documentation:
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/emulator_startup_options.htm
- You can communicate with the running Tizen emulator using Smart Development Bridge (SDB). For more information and details, please check the next recipe. Descriptions and examples of deploying and running applications on the emulator as well as simulating events with the Event Injector are available in Chapter 11, Debugging Apps in Tizen.
- Chapter 11, Debugging Apps in Tizen.
Smart Development Bridge (SDB) is a command-line tool for communication with the Tizen emulator or connected Tizen devices. Its role in Tizen is the same as the role of Android Debug Bridge (ADB) in Android. SDB is an essential part of the Tizen SDK and it is installed with it. SDB manages multiple device connections and provides basic commands for application development and debugging. The main features of SDB are as follows:
SDB works as a typical client-server application and it consists of three main components:
- A client that runs on the development system and can be invoked from the command line using the SDB command.
- A server that manages the connection and the communication with the Tizen Emulator and devices. It runs as a background process on the development system.
- A daemon that runs on each Tizen Emulator or device.
To add SDB to the environmental path of Windows 7, perform the following steps:
To add SDB to the environmental path for all users on Mac OS X Leopard and above, create a text file at the directory /etc/paths.d/
and set the location of SDB within it using root privileges, for example, sudo -s 'echo "<tizen_sdk>/sdb" > /etc/paths.d/sdb'
.
tizen_sdk/SDK/sdb
. To use the client, an SDB command must be executed within its directory unless the sdb
location has been added to the environmental path variable.
To add SDB to the environmental path of Windows 7, perform the following steps:
To add SDB to the environmental path for all users on Mac OS X Leopard and above, create a text file at the directory /etc/paths.d/
and set the location of SDB within it using root privileges, for example, sudo -s 'echo "<tizen_sdk>/sdb" > /etc/paths.d/sdb'
.
environmental path of Windows 7, perform the following steps:
To add SDB to the environmental path for all users on Mac OS X Leopard and above, create a text file at the directory /etc/paths.d/
and set the location of SDB within it using root privileges, for example, sudo -s 'echo "<tizen_sdk>/sdb" > /etc/paths.d/sdb'
.
SDB is a powerful tool with a lot of capabilities and features. Although you can successfully develop applications using the Tizen IDE without even knowing what SDB is, it is recommended to explore the options of the tool. SDB is a developer's best friend when it comes to management of a connected device, transferring files, and debugging applications.
Perform the following steps to enable and use SDB:
- Make sure that the date and time on your devices is correct.
- Enable the developer mode and USB debugging on a Tizen device by navigating to Settings | Developer options | USB debugging.
- Connect the Tizen device to a computer.
- Run the SDB command in a console using the following syntax:
sdb [option] <command> [parameters]
According to the Tizen 2.2.1 official development guide, the values provided for option
in the preceding command can be:
-d
: This stands for select device. This sends the specified command to a connected USB device. Please note that this option will fail if multiple Tizen devices are attached over USB.-e
: This option is used to control an emulator. The error handling is similar to that of the option-d
. If multiple emulators are running, this command will fail and an error will be returned. Direct the command to the only running emulator and return an error if more than one emulators are present.-s <serial number>
: Tizen devices or emulators that are attached to a developer's computer are identified by their serial number. The-s
option should be followed by the serial number of the device and SDB will take care to target the command only to the specified device.
The following is a list of all the supported SDB commands with some brief information about them:
- The information provided by the log buffers of a device might be valuable during the debugging of Tizen applications. More details and advanced usage examples of
sdb dlog
are available in Chapter 11, Debugging Apps in Tizen. - The full list of SDB supported commands as of Tizen SDK 2.2.1 is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/commands.htm.
According to the Tizen 2.2.1 official development guide, the values provided for option
in the preceding command can be:
-d
: This stands for select device. This sends the specified command to a connected USB device. Please note that this option will fail if multiple Tizen devices are attached over USB.-e
: This option is used to control an emulator. The error handling is similar to that of the option-d
. If multiple emulators are running, this command will fail and an error will be returned. Direct the command to the only running emulator and return an error if more than one emulators are present.-s <serial number>
: Tizen devices or emulators that are attached to a developer's computer are identified by their serial number. The-s
option should be followed by the serial number of the device and SDB will take care to target the command only to the specified device.
The following is a list of all the supported SDB commands with some brief information about them:
- The information provided by the log buffers of a device might be valuable during the debugging of Tizen applications. More details and advanced usage examples of
sdb dlog
are available in Chapter 11, Debugging Apps in Tizen. - The full list of SDB supported commands as of Tizen SDK 2.2.1 is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/commands.htm.
sdb dlog
are available in
- Chapter 11, Debugging Apps in Tizen.
- The full list of SDB supported commands as of Tizen SDK 2.2.1 is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.gettingstarted/html/dev_env/commands.htm.
In this chapter, we will cover:
Three types of installable applications are supported by Tizen:
- Web applications are developed using HTML5, JavaScript, and CSS. This is the recommended type, because these applications are supported by all Tizen profiles (IVI, mobile, wearable, and so on).
- Native applications are developed using C++ and Tizen native APIs. They are faster but more complex and difficult to port.
- Hybrid applications combine web and native applications. A hybrid application contains a single web application with a user interface and one or more native service applications that communicate with each other.
The Tizen SDK provides tools to turn good ideas into excellent applications and to publish them to Tizen Store. The life cycle of Tizen applications is similar to the life cycle of mobile applications for Android and iOS, and it includes the steps described in the following section.
The development of an application is a continuous process. You have to provide regular updates with new features and enhancements. Arm yourself with patience. Some steps might require more time than expected. Sometimes, you may even need to go back to a previous step, for example, if the QA of Tizen Store rejects the application.
Before you start, make sure that you have successfully installed the Tizen developer environment. A Tizen device or emulator is required to debug applications. If you do not have a device, just create an emulator using Tizen Emulator Manager.
- Come up with a good idea.
A good idea lies behind each great mobile application. All you need is inspiration, but unfortunately, as far as I know, there are no strict rules, standards, or algorithms, so you have to think out of the box.
- Design the application user interface (UI) and implement the backend.
The user interface and the user experience are the key factors that convert a good idea into an exceptional application with a lot of downloads. Plan the development road map of the application carefully, and select the best approach for implementation. If your application communicates with a web service, wisely distribute the load between the mobile application and the server to achieve optimal performance. UML diagrams might help you to prepare well before you start coding. Always remember that a good plan can save you a lot of time during development.
- Build a Tizen application.
The Tizen IDE provides the tools required for easy building of a Tizen application with a single click. Before you start the build, you have to configure its settings. Navigate to Project | Build Configuration to manage the available build settings. After that, you can build the application at any appropriate time by hitting F10 or navigating to Project | Build Project.
- Debug the Tizen application.
Try out the application on a Tizen device and emulator to verify that it is working as expected. Testing is very important, because even a minor bug can irritate users, and they might stop using your application.
- Package the application.
All files of the application have to be bundled into a package that can be installed on Tizen devices. The file extension of the package is
.tpk
for native applications and.wgt
for web applications. - Certify the application and publish it to Tizen Store.
The final step is to release your app to the market. The easiest way to reach millions of users from around the world is to distribute your application through application stores, such as the official Tizen Store.
- Tutorials and examples about web applications for Tizen are available in the second part of this book. Check Chapter 11, Debugging Apps in Tizen, for details about debugging apps in Tizen. More information about packaging, certification, and publishing to Tizen Store is available in other recipes of this chapter.
Before you start, make sure that you have successfully installed the Tizen developer environment. A Tizen device or emulator is required to debug applications. If you do not have a device, just create an emulator using Tizen Emulator Manager.
- Come up with a good idea.
A good idea lies behind each great mobile application. All you need is inspiration, but unfortunately, as far as I know, there are no strict rules, standards, or algorithms, so you have to think out of the box.
- Design the application user interface (UI) and implement the backend.
The user interface and the user experience are the key factors that convert a good idea into an exceptional application with a lot of downloads. Plan the development road map of the application carefully, and select the best approach for implementation. If your application communicates with a web service, wisely distribute the load between the mobile application and the server to achieve optimal performance. UML diagrams might help you to prepare well before you start coding. Always remember that a good plan can save you a lot of time during development.
- Build a Tizen application.
The Tizen IDE provides the tools required for easy building of a Tizen application with a single click. Before you start the build, you have to configure its settings. Navigate to Project | Build Configuration to manage the available build settings. After that, you can build the application at any appropriate time by hitting F10 or navigating to Project | Build Project.
- Debug the Tizen application.
Try out the application on a Tizen device and emulator to verify that it is working as expected. Testing is very important, because even a minor bug can irritate users, and they might stop using your application.
- Package the application.
All files of the application have to be bundled into a package that can be installed on Tizen devices. The file extension of the package is
.tpk
for native applications and.wgt
for web applications. - Certify the application and publish it to Tizen Store.
The final step is to release your app to the market. The easiest way to reach millions of users from around the world is to distribute your application through application stores, such as the official Tizen Store.
- Tutorials and examples about web applications for Tizen are available in the second part of this book. Check Chapter 11, Debugging Apps in Tizen, for details about debugging apps in Tizen. More information about packaging, certification, and publishing to Tizen Store is available in other recipes of this chapter.
A good idea lies behind each great mobile application. All you need is inspiration, but unfortunately, as far as I know, there are no strict rules, standards, or algorithms, so you have to think out of the box.
The user interface and the user experience are the key factors that convert a good idea into an exceptional application with a lot of downloads. Plan the development road map of the application carefully, and select the best approach for implementation. If your application communicates with a web service, wisely distribute the load between the mobile application and the server to achieve optimal performance. UML diagrams might help you to prepare well before you start coding. Always remember that a good plan can save you a lot of time during development.
The Tizen IDE provides the tools required for easy building of a Tizen application with a single click. Before you start the build, you have to configure its settings. Navigate to Project | Build Configuration to manage the available build settings. After that, you can build the application at any appropriate time by hitting F10 or navigating to Project | Build Project.
- Tizen application.
Try out the application on a Tizen device and emulator to verify that it is working as expected. Testing is very important, because even a minor bug can irritate users, and they might stop using your application.
- Package the application.
All files of the application have to be bundled into a package that can be installed on Tizen devices. The file extension of the package is
.tpk
for native applications and.wgt
for web applications. - Certify the application and publish it to Tizen Store.
The final step is to release your app to the market. The easiest way to reach millions of users from around the world is to distribute your application through application stores, such as the official Tizen Store.
- Tutorials and examples about web applications for Tizen are available in the second part of this book. Check Chapter 11, Debugging Apps in Tizen, for details about debugging apps in Tizen. More information about packaging, certification, and publishing to Tizen Store is available in other recipes of this chapter.
- web applications for Tizen are available in the second part of this book. Check Chapter 11, Debugging Apps in Tizen, for details about debugging apps in Tizen. More information about packaging, certification, and publishing to Tizen Store is available in other recipes of this chapter.
Web application development has been part of the Tizen project since its initial release. It is the recommended approach for application development on the platform. Millions of developers are already familiar with the basics of web development, so they can easily start developing applications for Tizen.
Web applications are installed and executed as standalone applications on Tizen, thanks to the Web Runtime (WRT) engine. All standard HTML5 APIs are supported. There are certain features that are not covered by these APIs, so Tizen web runtime fills the gap by providing additional JavaScript functions.
This recipe demonstrates WRT in action by creating a simple Hello World web application and running it on a Tizen device or an emulator.
- Launch the Tizen IDE, and if asked, choose a workspace.
- Navigate to File | New | Tizen Web Project.
- A wizard to create the project of the Tizen web application will appear. From Template select Tizen Web UI Framework and Single Page Application. Enter a project name, for example,
hello
. When you are ready, click on Finish. - Navigate to
config.xml
from Project Explorer, and open it using Widget Configuration Editor. By default, a double-click should open the file in Widget Configuration Editor. If not, place the mouse over the file, click on the right button, and select this option from Open with. - Open the Overview tab, and change the name to
HelloWorld
. This way, the name of the application will be different from the name of the project. - From Project Explorer, open
index.html
, replace its content with the following source code, and save the changes:<!DOCTYPE html> <html> <head> <meta charset="utf-8"/> <meta name="description" content="Hello World!"/> <meta name="viewport" content="width=device-width,user-scalable=no"/> <title>Hello World!</title> <link rel="stylesheet" href="tizen-web-ui-fw/latest/themes/tizen-white/tizen-web-ui-fw-theme.css" name="tizen-theme"/> <script src="tizen-web-ui-fw/latest/js/jquery.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw-libs.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw.js" data-framework-theme="tizen-white"></script> <script type="text/javascript" src="./js/main.js"></script> <link rel="stylesheet" type="text/css" href="./css/style.css"/> </head> <body> <div data-role="page"> <div data-role="header" data-position="fixed"> <h1>Tizen Cookbook</h1> </div> <div data-role="content"> <p>Hello World!</p> </div> <div data-role="footer" data-position="fixed"> <h4>Packt Publishing</h4> </div> </div> </body> </html>
Tip
You can download the example code files for all Packt books you have purchased from your account at http://www.packtpub.com. If you purchased this book elsewhere, you can visit http://www.packtpub.com/support and register to have the files e-mailed directly to you.
- Save all files.
- Make sure that a Tizen device with the developer mode enabled is connected or Emulator is running. If you are unsure how to enable the developer mode, have a look at the recipe Using Smart Development Bridge from the previous chapter.
- Select the project of the application from Project View, right-click on it, and from the menu that appears, navigate to Run as | Tizen Web Application. As an alternative, you can just hit the run button to deploy and launch the application.
This recipe demonstrates WRT in action by creating a simple Hello World web application and running it on a Tizen device or an emulator.
- Launch the Tizen IDE, and if asked, choose a workspace.
- Navigate to File | New | Tizen Web Project.
- A wizard to create the project of the Tizen web application will appear. From Template select Tizen Web UI Framework and Single Page Application. Enter a project name, for example,
hello
. When you are ready, click on Finish. - Navigate to
config.xml
from Project Explorer, and open it using Widget Configuration Editor. By default, a double-click should open the file in Widget Configuration Editor. If not, place the mouse over the file, click on the right button, and select this option from Open with. - Open the Overview tab, and change the name to
HelloWorld
. This way, the name of the application will be different from the name of the project. - From Project Explorer, open
index.html
, replace its content with the following source code, and save the changes:<!DOCTYPE html> <html> <head> <meta charset="utf-8"/> <meta name="description" content="Hello World!"/> <meta name="viewport" content="width=device-width,user-scalable=no"/> <title>Hello World!</title> <link rel="stylesheet" href="tizen-web-ui-fw/latest/themes/tizen-white/tizen-web-ui-fw-theme.css" name="tizen-theme"/> <script src="tizen-web-ui-fw/latest/js/jquery.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw-libs.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw.js" data-framework-theme="tizen-white"></script> <script type="text/javascript" src="./js/main.js"></script> <link rel="stylesheet" type="text/css" href="./css/style.css"/> </head> <body> <div data-role="page"> <div data-role="header" data-position="fixed"> <h1>Tizen Cookbook</h1> </div> <div data-role="content"> <p>Hello World!</p> </div> <div data-role="footer" data-position="fixed"> <h4>Packt Publishing</h4> </div> </div> </body> </html>
Tip
You can download the example code files for all Packt books you have purchased from your account at http://www.packtpub.com. If you purchased this book elsewhere, you can visit http://www.packtpub.com/support and register to have the files e-mailed directly to you.
- Save all files.
- Make sure that a Tizen device with the developer mode enabled is connected or Emulator is running. If you are unsure how to enable the developer mode, have a look at the recipe Using Smart Development Bridge from the previous chapter.
- Select the project of the application from Project View, right-click on it, and from the menu that appears, navigate to Run as | Tizen Web Application. As an alternative, you can just hit the run button to deploy and launch the application.
hello
. When you are ready, click on Finish.
config.xml
from Project Explorer, and open it using Widget Configuration Editor. By default, a double-click should open the file in Widget Configuration Editor. If not, place the mouse over the file, click on the right button, and select this option from Open with.
HelloWorld
. This way, the name of the
- application will be different from the name of the project.
- From Project Explorer, open
index.html
, replace its content with the following source code, and save the changes:<!DOCTYPE html> <html> <head> <meta charset="utf-8"/> <meta name="description" content="Hello World!"/> <meta name="viewport" content="width=device-width,user-scalable=no"/> <title>Hello World!</title> <link rel="stylesheet" href="tizen-web-ui-fw/latest/themes/tizen-white/tizen-web-ui-fw-theme.css" name="tizen-theme"/> <script src="tizen-web-ui-fw/latest/js/jquery.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw-libs.js"></script> <script src="tizen-web-ui-fw/latest/js/tizen-web-ui-fw.js" data-framework-theme="tizen-white"></script> <script type="text/javascript" src="./js/main.js"></script> <link rel="stylesheet" type="text/css" href="./css/style.css"/> </head> <body> <div data-role="page"> <div data-role="header" data-position="fixed"> <h1>Tizen Cookbook</h1> </div> <div data-role="content"> <p>Hello World!</p> </div> <div data-role="footer" data-position="fixed"> <h4>Packt Publishing</h4> </div> </div> </body> </html>
Tip
You can download the example code files for all Packt books you have purchased from your account at http://www.packtpub.com. If you purchased this book elsewhere, you can visit http://www.packtpub.com/support and register to have the files e-mailed directly to you.
- Save all files.
- Make sure that a Tizen device with the developer mode enabled is connected or Emulator is running. If you are unsure how to enable the developer mode, have a look at the recipe Using Smart Development Bridge from the previous chapter.
- Select the project of the application from Project View, right-click on it, and from the menu that appears, navigate to Run as | Tizen Web Application. As an alternative, you can just hit the run button to deploy and launch the application.
config.xml
. The Tizen IDE provides means to simplify the editing process of the file. The name, the identifier, the version, the icon file, as well as the entry file, which is index.html
by default, are among the configurations stored in config.xml
. Access to sensitive APIs should also be set by describing privileges at this file if the application uses such sensitive APIs.
js/main.js
will be generated by the IDE, and it will contain the JavaScript source code for initialization of the application and for the handling of the back hardware button. Pay attention to the fact that jQuery is also included because the Tizen Web UI framework is based on jQuery Mobile.
Tizen provides a collection of APIs following the specification of W3C/HTML5 and the nonprofit industry consortium to create the open standards Khronos. A set of additional APIs that provide access to specific hardware and software capabilities of the devices are also provided. These APIs are based on JavaScript, and this programming language must be used to take advantage of the APIs.
The Tizen platform provides the following JavaScript-based APIs for development of web applications:
- Alarm: This API adds or removes date and time events through the methods provided by this API
- Application: This manages installed and running applications
- Data Control: This API helps in accessing and controlling the available shared data of other applications
- Packages: This API helps in installing and uninstalling packages or retrieving details about installed packages
- Bluetooth: This API provides control over the short distance communication protocol, Bluetooth
- Messaging: This API provides messaging capabilities through different popular communication channels: SMS, MMS, and e-mail
- Network Bearer Selection: This API controls and selects the network bearer
- NFC: This provides connection to other devices in close range using NFC
- Push: This API helps in receiving and handling push notifications from the izen remote server
- Secure Element: This API accesses data on the secure smart card chip
- Content: This API discovers and explores multimedia content, such as video or music
- Download: This API provides methods to download files over HTTP/HTTPS
- Filesystem: This API provides methods to access the filesystem, create, read, and write files
- Message port: This API provides capabilities for communication between different applications
- Bookmark: This API accesses and manages bookmarks
- Calendar: This API accesses and manages the calendar
- Call History: This API provides information about incoming and outgoing calls
- Contact: This API manages the address book
- Data Synchronization: This API provides interfaces for device data synchronization
- Power: This API is used for power management
- System information: This API provides information about the battery, CPU, storage, WiFi, cellular network, and so on
- System setting: This API provides access to various settings of the platform
- Time: This API retrieves information about date and time
- Web setting: This API control setting is specific to the web view of Tizen web applications
- Notification: This API notifies the user about events related to the application
Launch the Tizen IDE and create a new project for Tizen web application, and append the privileges required for the API that you plan to use for config.xml
, for example, http://tizen.org/privilege/alarm.
Take, for instance, the following JavaScript code, which demonstrates the simple usage of the Alarm and Application APIs:
// Get the ID of the current application var sAppId = tizen.application.getCurrentApplication().appInfo.id; // Set an alarm which will occur after couple of hours var myAlarm = new tizen.AlarmRelative(2 * tizen.alarm.PERIOD_HOUR); if (null != myAlarm) { tizen.alarm.add(myAlarm, sAppId); }
The Application API is used to retrieve the ID of the current application, and it is assigned to the JavaScript variable sAppId
. After that, a relative alarm that will occur after a couple of hours is created and assigned to the variable myAlarm
using the Alarm API. Finally, on the last line of the code snippet, the alarm is added to the alarm storage of the current application.
As you can see, both APIs used in the code snippet are accessed through the tizen
JavaScript object.
- API adds or removes date and time events through the methods provided by this API
- Application: This manages installed and running applications
- Data Control: This API helps in accessing and controlling the available shared data of other applications
- Packages: This API helps in installing and uninstalling packages or retrieving details about installed packages
- Bluetooth: This API provides control over the short distance communication protocol, Bluetooth
- Messaging: This API provides messaging capabilities through different popular communication channels: SMS, MMS, and e-mail
- Network Bearer Selection: This API controls and selects the network bearer
- NFC: This provides connection to other devices in close range using NFC
- Push: This API helps in receiving and handling push notifications from the izen remote server
- Secure Element: This API accesses data on the secure smart card chip
- Content: This API discovers and explores multimedia content, such as video or music
- Download: This API provides methods to download files over HTTP/HTTPS
- Filesystem: This API provides methods to access the filesystem, create, read, and write files
- Message port: This API provides capabilities for communication between different applications
- Bookmark: This API accesses and manages bookmarks
- Calendar: This API accesses and manages the calendar
- Call History: This API provides information about incoming and outgoing calls
- Contact: This API manages the address book
- Data Synchronization: This API provides interfaces for device data synchronization
- Power: This API is used for power management
- System information: This API provides information about the battery, CPU, storage, WiFi, cellular network, and so on
- System setting: This API provides access to various settings of the platform
- Time: This API retrieves information about date and time
- Web setting: This API control setting is specific to the web view of Tizen web applications
- Notification: This API notifies the user about events related to the application
Launch the Tizen IDE and create a new project for Tizen web application, and append the privileges required for the API that you plan to use for config.xml
, for example, http://tizen.org/privilege/alarm.
Take, for instance, the following JavaScript code, which demonstrates the simple usage of the Alarm and Application APIs:
// Get the ID of the current application var sAppId = tizen.application.getCurrentApplication().appInfo.id; // Set an alarm which will occur after couple of hours var myAlarm = new tizen.AlarmRelative(2 * tizen.alarm.PERIOD_HOUR); if (null != myAlarm) { tizen.alarm.add(myAlarm, sAppId); }
The Application API is used to retrieve the ID of the current application, and it is assigned to the JavaScript variable sAppId
. After that, a relative alarm that will occur after a couple of hours is created and assigned to the variable myAlarm
using the Alarm API. Finally, on the last line of the code snippet, the alarm is added to the alarm storage of the current application.
As you can see, both APIs used in the code snippet are accessed through the tizen
JavaScript object.
config.xml
, for example,
http://tizen.org/privilege/alarm.
Take, for instance, the following JavaScript code, which demonstrates the simple usage of the Alarm and Application APIs:
// Get the ID of the current application var sAppId = tizen.application.getCurrentApplication().appInfo.id; // Set an alarm which will occur after couple of hours var myAlarm = new tizen.AlarmRelative(2 * tizen.alarm.PERIOD_HOUR); if (null != myAlarm) { tizen.alarm.add(myAlarm, sAppId); }
The Application API is used to retrieve the ID of the current application, and it is assigned to the JavaScript variable sAppId
. After that, a relative alarm that will occur after a couple of hours is created and assigned to the variable myAlarm
using the Alarm API. Finally, on the last line of the code snippet, the alarm is added to the alarm storage of the current application.
As you can see, both APIs used in the code snippet are accessed through the tizen
JavaScript object.
tizen
JavaScript object. A set of generic functions, including error handling and filters, is also provided with the tizen
object.
In this recipe, you will learn how to a support multiple languages inside the Tizen web application using a folder-based technique for localization.
Perform the following steps to localize a Tizen application:
- Open the application's project, and select its root folder at Project View.
- From the main menu of the Tizen IDE, navigate to Project | Localization | Localization Wizard... as shown in the following screenshot:
- On the first screen of Localization Wizard, choose the files that will be localized, and click on Next.
- Select locales from the list of Available locales, and include them in the Selected locales list. After that, click on Next.
- Select the files that have to be translated to the chosen locales by checking their filenames, and click on Finish.
- Define translation tables for each supported language. For example, the following code snippet defines the default language (English) and French:
Globalize.addCultureInfo("default", { messages: { "hello" : "Hello" } }); Globalize.addCultureInfo("fr", { messages: { "hello" : "Bonjour" } });
- Use a translation string with automatic or manual language selection as follows:
console.log(Globalize.localize("hello")); console.log(Globalize.localize("hello", "fr"));
Pay attention to the fact that the messages are case sensitive. The output on the Tizen device or Emulator on which the display language has been set to English will be as follows:
For more information about the open source library, Globalize
, visit https://github.com/jquery/globalize.
- Localization Wizard, choose the files that will be localized, and click on Next.
- Select locales from the list of Available locales, and include them in the Selected locales list. After that, click on Next.
- Select the files that have to be translated to the chosen locales by checking their filenames, and click on Finish.
- Define translation tables for each supported language. For example, the following code snippet defines the default language (English) and French:
Globalize.addCultureInfo("default", { messages: { "hello" : "Hello" } }); Globalize.addCultureInfo("fr", { messages: { "hello" : "Bonjour" } });
- Use a translation string with automatic or manual language selection as follows:
console.log(Globalize.localize("hello")); console.log(Globalize.localize("hello", "fr"));
Pay attention to the fact that the messages are case sensitive. The output on the Tizen device or Emulator on which the display language has been set to English will be as follows:
For more information about the open source library, Globalize
, visit https://github.com/jquery/globalize.
locales
at the root level of the application package and creates separate folders in it for each selected locale. All files that have been chosen for localization of the selected locale will be included in its folder. For example, if we decide to create the French localization of index.html
, then the folder /locales/fr
will be created and the file will be copied in it.
locales
folder, and its original version from the root level of the package will be automatically loaded.
- Define translation tables for each supported language. For example, the following code snippet defines the default language (English) and French:
Globalize.addCultureInfo("default", { messages: { "hello" : "Hello" } }); Globalize.addCultureInfo("fr", { messages: { "hello" : "Bonjour" } });
- Use a translation string with automatic or manual language selection as follows:
console.log(Globalize.localize("hello")); console.log(Globalize.localize("hello", "fr"));
Pay attention to the fact that the messages are case sensitive. The output on the Tizen device or Emulator on which the display language has been set to English will be as follows:
For more information about the open source library, Globalize
, visit https://github.com/jquery/globalize.
Globalize
. Perform the following steps to enable and use this library:
Globalize.addCultureInfo("default", { messages: { "hello" : "Hello" } }); Globalize.addCultureInfo("fr", { messages: { "hello" : "Bonjour" } });
console.log(Globalize.localize("hello")); console.log(Globalize.localize("hello", "fr"));
After the successful development and testing of a web application, all of its files must be bundled together into a single file called package
that has the extension .wgt
. The package contains all the HTML, CSS, JavaScript, and any other resource files of the application. The .wgt
file is used to install web applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
The package produced by the Tizen IDE is created according to W3C recommendations for web applications. For more information, visit http://www.w3.org/TR/widgets/.
The content of the package is compressed using the ZIP archive algorithms and its file must have the extension .wgt
. Its MIME type is application/widget
.
Several files and folders with reserved names shown in the following table have to be included inside the package of the Tizen web application. After successful installation, a directory, whose name matches the package ID, is created at /opt/usr/apps
. The directory hierarchy also includes folders bin
(for the application's binary files), data
, and res
.
Name |
Description |
---|---|
|
Web widget's configurations. |
|
Several file types for |
| |
| |
| |
| |
|
Several file types are supported for main entry page. By default the name is |
| |
| |
| |
| |
|
Directory that contains localization data. |
Reserve directory and filenames for web applications
Web applications can be installed through SDB through the Tizen IDE or the command-line interface if the developer mode is enabled. Users can download the application from Tizen Store or other stores once it is published.
The package manager of the operating system on the device is responsible for the installation and the management of installed applications. To see the list of all installed applications, launch Settings and select Manage Applications. Click on the application to remove it or to stop it if it is running.
Since Tizen 2.0, it is possible to develop mobile applications using C/C++ programming languages. Although in most of the cases, web applications should be preferred and recommended, native programming is useful for faster performance, low-level access to device capabilities, compatibility with existing Bada applications, as well as third-party libraries and frameworks, such as Qt for Tizen. Native programming for Tizen supports both service applications and applications with GUI.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
The package produced by the Tizen IDE is created according to W3C recommendations for web applications. For more information, visit http://www.w3.org/TR/widgets/.
The content of the package is compressed using the ZIP archive algorithms and its file must have the extension .wgt
. Its MIME type is application/widget
.
Several files and folders with reserved names shown in the following table have to be included inside the package of the Tizen web application. After successful installation, a directory, whose name matches the package ID, is created at /opt/usr/apps
. The directory hierarchy also includes folders bin
(for the application's binary files), data
, and res
.
Name |
Description |
---|---|
|
Web widget's configurations. |
|
Several file types for |
| |
| |
| |
| |
|
Several file types are supported for main entry page. By default the name is |
| |
| |
| |
| |
|
Directory that contains localization data. |
Reserve directory and filenames for web applications
Web applications can be installed through SDB through the Tizen IDE or the command-line interface if the developer mode is enabled. Users can download the application from Tizen Store or other stores once it is published.
The package manager of the operating system on the device is responsible for the installation and the management of installed applications. To see the list of all installed applications, launch Settings and select Manage Applications. Click on the application to remove it or to stop it if it is running.
Since Tizen 2.0, it is possible to develop mobile applications using C/C++ programming languages. Although in most of the cases, web applications should be preferred and recommended, native programming is useful for faster performance, low-level access to device capabilities, compatibility with existing Bada applications, as well as third-party libraries and frameworks, such as Qt for Tizen. Native programming for Tizen supports both service applications and applications with GUI.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
The package produced by the Tizen IDE is created according to W3C recommendations for web applications. For more information, visit http://www.w3.org/TR/widgets/.
The content of the package is compressed using the ZIP archive algorithms and its file must have the extension .wgt
. Its MIME type is application/widget
.
Several files and folders with reserved names shown in the following table have to be included inside the package of the Tizen web application. After successful installation, a directory, whose name matches the package ID, is created at /opt/usr/apps
. The directory hierarchy also includes folders bin
(for the application's binary files), data
, and res
.
Name |
Description |
---|---|
|
Web widget's configurations. |
|
Several file types for |
| |
| |
| |
| |
|
Several file types are supported for main entry page. By default the name is |
| |
| |
| |
| |
|
Directory that contains localization data. |
Reserve directory and filenames for web applications
Web applications can be installed through SDB through the Tizen IDE or the command-line interface if the developer mode is enabled. Users can download the application from Tizen Store or other stores once it is published.
The package manager of the operating system on the device is responsible for the installation and the management of installed applications. To see the list of all installed applications, launch Settings and select Manage Applications. Click on the application to remove it or to stop it if it is running.
Since Tizen 2.0, it is possible to develop mobile applications using C/C++ programming languages. Although in most of the cases, web applications should be preferred and recommended, native programming is useful for faster performance, low-level access to device capabilities, compatibility with existing Bada applications, as well as third-party libraries and frameworks, such as Qt for Tizen. Native programming for Tizen supports both service applications and applications with GUI.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
the Tizen IDE is created according to W3C recommendations for web applications. For more information, visit http://www.w3.org/TR/widgets/.
The content of the package is compressed using the ZIP archive algorithms and its file must have the extension .wgt
. Its MIME type is application/widget
.
Several files and folders with reserved names shown in the following table have to be included inside the package of the Tizen web application. After successful installation, a directory, whose name matches the package ID, is created at /opt/usr/apps
. The directory hierarchy also includes folders bin
(for the application's binary files), data
, and res
.
Name |
Description |
---|---|
|
Web widget's configurations. |
|
Several file types for |
| |
| |
| |
| |
|
Several file types are supported for main entry page. By default the name is |
| |
| |
| |
| |
|
Directory that contains localization data. |
Reserve directory and filenames for web applications
Web applications can be installed through SDB through the Tizen IDE or the command-line interface if the developer mode is enabled. Users can download the application from Tizen Store or other stores once it is published.
The package manager of the operating system on the device is responsible for the installation and the management of installed applications. To see the list of all installed applications, launch Settings and select Manage Applications. Click on the application to remove it or to stop it if it is running.
Since Tizen 2.0, it is possible to develop mobile applications using C/C++ programming languages. Although in most of the cases, web applications should be preferred and recommended, native programming is useful for faster performance, low-level access to device capabilities, compatibility with existing Bada applications, as well as third-party libraries and frameworks, such as Qt for Tizen. Native programming for Tizen supports both service applications and applications with GUI.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Since Tizen 2.0, it is possible to develop mobile applications using C/C++ programming languages. Although in most of the cases, web applications should be preferred and recommended, native programming is useful for faster performance, low-level access to device capabilities, compatibility with existing Bada applications, as well as third-party libraries and frameworks, such as Qt for Tizen. Native programming for Tizen supports both service applications and applications with GUI.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Tizen native applications for mobile devices are based on the graphics stack of Bada, which is known as a native framework or OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
OSP (Open Service Platform). During the port of existing Bada C++ applications, the OSP
namespace should be renamed to Tizen
. This porting process can easily be done through the Tizen IDE. The full list of available namespaces in the Tizen native framework is available at https://developer.tizen.org/dev-guide/2.2.1/org.tizen.native.apireference/namespaces.html.
Furthermore, Tizen native frameworks contain hidden gems, such as the specific life cycle of native applications and the macros used for logging.
Please explore in detail the native development documentation if you plan to develop sophisticated Tizen native mobile applications.
Follow these guidelines to create a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
a simple Tizen native application:
- Launch Tizen IDE and, if asked, choose a workspace. It is highly recommended to switch the IDE to native perspective.
- Navigate to File | New | Project....
- A wizard to create a project will appear. From the list of different project types, select Tizen | Native Tizen Project, and after that, click on Next.
- From Template, select Tizen Form-based Application and Without SceneManager. Enter a project name, for example,
helloWorldNative
. After that, click on Finish. - Select the project from the Project View, and right-click to open the context menu with additional options. Choose Run Native UI Builder.
- Wait until Tizen Native UI Builder is completely loaded. Select
Header
ofIDL_FORM
from the Outline view. - Go to the Properties view of the Native UI Builder, and expand all properties. Change Title Text to
Hello World
. - Save changes and close the Native UI Builder.
- Open
manifest.xml
using the Tizen Manifest Editor, and select the Features tab. - Click on Add, select http://tizen.org/feature/screen.size.all to support all screen sizes, and confirm your choice.
- Make sure that a Tizen device with enabled developer mode is connected or the emulator is running. Again, select the application's project in Project View of the Tizen IDE, and right-click to open the context menu. Navigate to Run as | Tizen Native Application. The alternative is just to hit the Run button to deploy and launch the application.
After the launch of a native application, OnAppInitializing()
is the first method that is called. After that method, OnAppInitialized()
is also called, and it creates the frame of our example application using the method AddFrame()
:
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Tizen::App::UiApp
or the class Tizen::App::ServiceApp
. Our example inherits Tizen::App::UiApp
and overloads several methods including OnAppInitializing()
and OnAppInitialized()
.
The nothrow
statement is used as an argument of the new operator when helloWorldFrame
is created to guarantee that an exception will not be thrown. Also note the L
prefix of the hardcoded string of the name. It indicates that the text is a Unicode string.
While the application is running, each frame can be in one of the following three states: activated, deactivated, or minimized. Upon termination of the application, the method OnAppTerminating()
gets called, and all resources must be released.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
After the successful development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
development and testing of a native application, all of its files must be bundled together into a single installation file, whose extension is .tpk
. This file is called package
. It sounds similar to the Android application package file (APK), and it has the same purpose. The .tpk
file is used to install native applications on Tizen devices and should be uploaded to Tizen Store when the application is published.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
- Open all projects that should be included in the package in the Project Explorer view of the Tizen IDE.
- Select the project with GUI in Project Explorer, and right-click on it.
- Go to Properties | Project References.
- Check the project of the service applications related to the GUI project.
- Click on OK, and proceed with the packaging of the GUI project.
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
The Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
.tpk
. The MIME type of the package is application/x-tizen.package-archive
. The content of the package is spread among the following directories, whose names are reserved:
Directory Name |
Description |
---|---|
|
Application's binaries |
|
Private data |
|
Metadata (including |
|
Libraries |
|
Resources |
|
Settings |
|
Shared resources |
Tizen package manager is responsible for installing, updating, and uninstalling the packages of both native and web applications. After successful installation, the package is extracted in a separate directory again at /opt/usr/apps
, but the directory structure is slightly different from that of a web application.
To view all installed applications on a Tizen device or Emulator, launch Settings, and go to Manage Applications. To remove an application, select it from the list, click on Uninstall, and confirm the uninstallation. Applications can be also removed using SDB if the developer mode is enabled.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Registering with Tizen Store is free, and no special preparation is needed. Please prepare a scanned copy of your business registration certificate and your bank account details if you plan to request commercial status and publish paid applications.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
To register as a Tizen Store seller, you should perform the following simple actions:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
- http://seller.tizenstore.com.
- Click on Sign Up Now.
- If you are an independent developer, select Register as a Private Seller. If you are representing a company, select Register as a Corporate Seller.
- Follow the onscreen instructions (four steps), and provide the required information to complete the registration successfully.
- To publish paid applications, you should obtain commercial status. Click on the Request Commercial Seller Status button on the last step of the registration, or log in and go to your profile page.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
Before you start, it is highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
highly recommended that you check the Tizen Store Validation Guide, which is available under the Guides section of the seller's website.
Upload and publish your Tizen application to Tizen Store in five simple steps:
- Launch your favorite web browser, and go to http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
- http://seller.tizenstore.com.
- Click on Add New App.
- Fill in the basic information, upload the application's package, and after that, click on Next to proceed.
- On the Display Information screen, fill the description, add tags, and so on. When you are ready, click on Next.
- Verify the information that you have entered on the Final Review screen, and if everything is OK, click on Confirm.
The application uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.
uploaded is validated by the QA team, and if it is approved, it will become available for download from Tizen Store. The validation process takes approximately three days, and it is divided into two phases: Initial Inspection and Dynamic Analysis, and Review and Final Confirmation. The first phase checks for API privileges, security issues, malware, and so on. It is done automatically. The second phase is performed manually. If the application successfully passes both phases, its status will be changed to Ready for Sale. Otherwise, if the application fails to pass validation, a report with details will be provided to the seller.