Creating Our First Game

Exclusive offer: get 50% off this eBook here
jQuery Game Development Essentials

jQuery Game Development Essentials — Save 50%

Learn how to make fun and addictive multi-platform games using jQuery with this book and ebook.

$26.99    $13.50
by Selim Arsever | May 2013 | Games

If you lay your eyes on an electronic device, chances are that there is a browser running on it! You probably have more than one installed on each of your PCs and some more running on your portable devices. If you want to distribute your games to a wide audience for a minimal cost of entry, making it run in the browser makes a lot of sense.

Flash was for a long time the go-to platform for games in browsers, but it has been losing speed in the last few years. There are many reasons for this and there have been countless arguments about whether this is a good thing or not. There is, however, a consensus on the fact that you can now make games run in the browser without plugins at a reasonable speed.

This article Selim Arsever, author of jQuery Game Development Essentials, will focus on 2D games as they are the ones that run well on current browsers and the features they depend on are standardized. This means that an update of the browser shouldn't break your games and that for the most part you don't have to worry too much about difference between browsers.

(For more resources related to this topic, see here.)

Let's get serious – the game

The game we will implement now is inspired by Frogger. In this old school arcade game, you played the role of a frog trying to cross the screen by jumping on logs and avoiding cars.

In our version, the player is a developer who has to cross the network cable by jumping packets and then cross the browser "road" by avoiding bugs. To sum up, the game specifications are as follows:

  • If the player presses the up arrow key once, the "frog" will go forward one step.

  • By pressing the right and left arrow key, the player can move horizontally.

  • In the first part (the network cable) the player has to jump on packets coming from the left of the screen and moving to the right. The packets are organized in lines where packets of each line travel at different speeds. Once the player is on a packet, he/she will move along with it. If a packet drives the player outside of the screen, or if the player jumps on the cable without reaching a packet, he/she will die and start at the beginning of the same level once again.

  • In the second part (the browser part) the player has to cross the browser screen by avoiding the bugs coming from the left. If the player gets hit by a bug he/she will start at the beginning of the same level once again.

These are very simple rules, but as you will see they will already give us plenty of things to think about.

Learning the basics

Throughout this article, we will use DOM elements to render game elements. Another popular solution would be to use the Canvas element. There are plus and minus points for both technologies and there are a few effects that are simply not possible to produce with only DOM elements.

However, for the beginner, the DOM offers the advantage of being easier to debug, to work on almost all existing browsers (yes, even on Internet Explorer 6), and in most cases to offer reasonable speed for games. The DOM also abstracts the dirty business of having to target individual pixels and tracking which part of the screen has to be redrawn.

Even though Internet Explorer supports most of the features we will see in this book, I would not recommend creating a game that supports it. Indeed, its market share is negligible nowadays ( and you will encounter some performance issues.

Now from some game terminology, sprites are the moving part of a game. They may be animated or nonanimated (in the sense of changing their aspect versus simply moving around). Other parts of the game may include the background, the UI, and tiles.


During this article, we will write some code; part of the code belongs to an example game and is used to describe scenes or logic that are specific to it. Some code, however, is very likely to be reused in each of your games. For this reason, we will regroup some of those functions into a framework that we will cleverly call gameFramework or gf in short.

A very simple way to define a namespace in JavaScript is to create an object and add all your function directly to it. The following code gives you an example of what this might look like for two functions, shake and stir, in the namespace cocktail.

// define the namespace
var cocktail = {};
// add the function shake to the namespace
cocktail.shake = function(){...}
// add the function stir to the namespace
cocktail.stir = function(){...}

This has the advantage of avoiding collision with other libraries that use similar names for their objects or functions. Therefore, from now on when you see any function added to the namespace, it will mean that we think those functions will be used by the other games we will create later in this article or that you might want to create yourself.

The following code is another notation for namespace. Which one you use is a personal preference and you should really use the one that feels right to you!

var cocktail = {
// add the function shake to the namespace
shake: function(){...},
// add the function stir to the namespace
stir: function(){...}

Typically, you would keep the code of the framework in a JS file (let's say gameFramework.js) and the code of the game in another JS file. Once your game is ready to be published, you may want to regroup all your JavaScript code into one file (including jQuery if you wish so) and minimize it. However, for the whole development phase it will be way more convenient to keep them separate.


Sprites are the basic building blocks of your game. They are basically images that can be animated and moved around the screen. To create them you can use any image editor. If you work on OS X, there is a free one that I find has been particularly well done, Pixen (

  • You can use animated gifs. With this method you have no way to access the index of the current frame through JavaScript, and no control over when the animation starts to play or when it ends. Furthermore, having many animated GIFs tends to slow things down a lot.

  • You can change the source of the image. This is already a better solution, but provides worse performance if proposed and requires a large number of individual images.

Another disadvantage is that you cannot choose to display only one part of the image; you have to show the entire image each time. Finally, if you want to have a sprite made of a repeating image, you will have to use many img elements.

For the sake of completeness, we should mention here one advantage of img; it's really easy to scale an img element—just adjust the width and height.

The proposed solution uses simple divs of defined dimensions and sets an image in the background. To generate animated sprites, you could change the background image, but instead we use the background position CSS property. The image used in this situation is called a sprite sheet and typically looks something like the following screenshot:

The mechanism by which the animation is generated is shown in the following screenshot:

Another advantage is that you can use a single sprite sheet to hold multiple animations. This way you will avoid having to load many different images. Depending on the situation, you may still want to use more than one sprite sheet, but it's a good thing to try to minimize their number.

Implementing animations

It's very simple to implement this solution. We will use .css() to change the background properties and a simple setInterval to change the current frame of the animation. Therefore, let's say that we have a sprite sheet containing 4 frames of a walk cycle where each frame measures 64 by 64 pixels.

First, we simply have to create a div with the sprite sheet as its background. This div should measure 64 by 64 pixels, otherwise the next frame would leak onto the current one. In the following example, we add the sprite to a div with the ID mygame.

$("#mygame").append("<div id='sprite1'>"); $("#sprite1").css("backgroundImage","url('spritesheet1.png')");

As the background image is by default aligned with the upper-left corner of the div, we will only see the first frame of the walk-cycle sprite sheet. What we want is to be able to change what frame is visible. The following function changes the background position to the correct position based on the argument passed to it. Take a look at the following code for the exact meaning of the arguments:

/** * This function sets the current frame. * -divId: the Id of the div from which you want to change the * frame * -frameNumber: the frame number * -frameDimension: the width of a frame **/ gameFramework.setFrame = function(divId,frameNumber, frameDimension) { $("#"+divId) .css("bakgroundPosition", "" + frameNumber * frameDimension + "px 0px"); }

Now we have to call this at regular intervals to produce the animation. We will use setInterval with an interval of 60 milliseconds, that is, around 17 frames per second. This should be enough to give the impression of walking; however, this really has to be fine-tuned to match your sprite sheet. To do this we use an anonymous function that we pass to setInterval, which will in turn call our function with the correct parameter.

var totalNumberOfFrame = 4;
var frameNumber = 0;
gameFramework.setFrame("sprite1",frameNumber, 64);
frameNumber = (frameNumber + 1) % totalNumberOfFrame;
}, 60);

You probably noticed that we're doing something special to compute the current frame. The goal is to cover values from 0 to 3 (as they're 4 frames) and to loop back to 0 when we reach 4. The operation we use for this is called modulo (%) and it's the rest of the integer division (also known as Euclidean division).

For example, at the third frame we have 3 / 4 which is equal to 0 plus a remainder of 3, so 3 % 4 = 3. When the frame number reaches 4 we have 4 / 4 = 1 plus a remainder of 0, so 4 % 4 = 0. This mechanism is used in a lot of situations.

Adding animations to our framework

As you can see there are more and more variables needed to generate an animation: the URL of the image, the number of frames, their dimension, the rate of the animation, and the current frame. Furthermore, all those variables are associated with one animation, so if we need a second one we have to define twice as many variables.

The obvious solution is to use objects. We will create an animation object that will hold all the variables we need (for now, it won't need any method). This object, like all the things belonging to our framework, will be in the gameFramework namespace. Instead of giving all the values of each of the properties of the animation as an argument, we will use a single object literal, and all the properties that aren't defined will default to some well-thought-out values.

To do this, jQuery offers a very convenient method: $.extend. This is a very powerful method and you should really take a look at the API documentation ( to see everything that it can do. Here we will pass to it three arguments: the first one will be extended with the values of the second one and the resulting object will be extended with the values of the third.

* Animation Object.
gf.animation = function(options) {
var defaultValues = {
url : false,
width : 64,
numberOfFrames : 1,
currentFrame : 0,
rate : 30
$.extend(this, defaultValues, options);

To use this function we will simply create a new instance of it with the desired values. Here you can see the values used in the preceding examples:

var firstAnim = new gameFramework.animation({
url: "spritesheet1.png",
numberOfFrames: 4,
rate: 60

As you can see, we didn't need to specify width: 64 because it's the default value! This pattern is very convenient and you should keep it in mind each time you need default values and also the flexibility to override them.

We can rewrite the function to use the animation object:

gf.setFrame = function(divId, animation) {
$("#" + divId)
.css("bakgroundPosition", "" + animation.currentFrame *
animation.width + "px 0px");

Now we will create a function for our framework based on the technique we've already seen, but this time it will use the new animation object. This function will start animating a sprite, either once or in a loop. There is one thing we have to be careful about—if we define an animation for a sprite that is already animated we need to deactivate the current animation and replace it with the new one.

To do this we will need an array to hold the list of all intervals' handles. Then we'll only need to check if one exists for this sprite and clear it, then define it again.

gf.animationHandles = {}; /** * Sets the animation for the given sprite. **/ gf.setAnimation = function(divId, animation, loop){ if(gf.animationHandles[divId]){ clearInterval(gf.animationHandles[divId]); } if(animation.url){ $("#"+divId).css("backgroundImage","url('"+animation. url+"')"); } if(animation.numberOfFrame > 1){ gf.animationHandles[divId] = setInterval(function(){ animation.currentFrame++; if(!loop && currentFrame > animation.numberOfFrame){ clearInterval(gf.animationHandles[divId]); gf.animationHandles[divId] = false; } else { animation.currentFrame %= animation. numberOfFrame; gf.setFrame(divId, animation); } }, animation.rate); } }

This will provide a convenient, flexible, and quite high-level way to set an animation for a sprite.

jQuery Game Development Essentials Learn how to make fun and addictive multi-platform games using jQuery with this book and ebook.
Published: April 2013
eBook Price: $26.99
Book Price: $44.99
See more
Select your format and quantity:

Moving sprites around

Now that we know how to animate a sprite, we need to move it around to make it interesting. A few things are necessary for this; first, the div that we use has to be positioned absolutely. This is very important for two reasons:

  • It's a nightmare for the developer to manipulate other positioning as soon as the scene becomes complicated.
  • It's by far the least expansive way for the browser to compute the position of an element.

What we want then is the sprite to be positioned relative to the div that holds the game. This means that it too has to be positioned, absolutely, relatively, or fixed.

Once those two conditions are met, we can simply use the top and left CSS properties to choose where the sprite appears on the screen, as shown in the following screenshot:

The following code sets the correct parameters for the container div and adds a sprite:

$("#mygame").css("position", "relative").append("<div id='sprite1' style='position: absolute'>");

As we will use this piece of code a lot, we will factor it into a function of our framework event if it's trivial. As we did for the animation constructor, we will use an object literal to define the optional arguments

/** * This function adds a sprite the div defined by the first argument **/ gf.addSprite = function(parentId, divId, options){ var options = $.extend({ x: 0, y: 0, width: 64, height: 64 }, options); $("#"+parentId).append("<div id='"+divId+"' style='position: absolute; left:"+options.x+"px; top: "+options.y+"px; width: "+options.width+"px ;height: "+options.height+"px'></div>"); }

We will then write a function that moves a sprite along the x axis and another one along the y axis. One typical convention in graphic programming is to have the x axis going from left to right and the y axis going from top to bottom. Those functions will take the ID of the element to move and the position to move it to. To mimic the way some jQuery functions work, our functions will return the current position of the sprite if you don't provide a second argument.

/** * This function sets or returns the position along the x-axis. **/ gf.x = function(divId,position) { if(position) { $("#"+divId).css("left", position); } else { return parseInt($("#"+divId).css("left")); } } /** * This function sets or returns the position along the y-axis. **/ gf.y = function(divId,position) { if(position) { $("#"+divId).css("top", position); } else { return parseInt($("#"+divId).css("top")); } }

With those three simple functions, you have all the basic tools that you need to generate the graphics of your game.


There is, however, one last thing that is required in most cases; asset loading. To avoid starting the game before some of the images are loaded you need to load them before. Most users expect the game to start loading only when they decide to start it. Furthermore, they want some feedback about the progress of the loading process.

In JavaScript, you have the possibility to define, for each image, a function that will be called once the image has finished loading. This, however, has a limitation that it won't provide you with information about the other images. And you can't simply define a callback for the last image that you start to run as you have no guarantee about the order in which your images will load, and in most cases images don't load one after the other, but rather a bunch at a time.

There are many possible solutions, most of them equally good. As this code is run in most cases only once and before the game starts, performance is not of great concern here. What you really want is a robust, flexible system to know when all the images are loaded and the possibility to track the overall progress.

Our solution will use two functions: one to add images to a list of image to preload and the other one to start the preloading.

gf.imagesToPreload = []; /** * Add an image to the list of image to preload **/ gf.addImage = function(url) { if ($.inArray(url, gf.imagesToPreload) < 0) { gf.imagesToPreload.push(); } gf.imagesToPreload.push(url); };

This first function doesn't do a lot. It simply takes an URL, checks if it's already present in the array where we store the images to preload, and if the new image is not in the array, add it.

The next function takes two callbacks. The first one is called once all the images are loaded and the second one (if defined) is called with the current progress as a percentage.

/** * Start the preloading of the images. **/ gf.startPreloading = function(endCallback, progressCallback) { var images = []; var total = gf.imagesToPreload.length; for (var i = 0; i < total; i++) { var image = new Image(); images.push(image); image.src = gf.imagesToPreload[i]; } var preloadingPoller = setInterval(function() { var counter = 0; var total = gf.imagesToPreload.length; for (var i = 0; i < total; i++) { if (images[i].complete) { counter++; } } if (counter == total) { //we are done! clearInterval(preloadingPoller); endCallback(); } else { if (progressCallback) { count++; progressCallback((count / total) * 100); } } }, 100); };

In this function, we start by defining a new Image object for every URL that was added to the list. They will automatically start loading. Then we define a function that we will call at regular intervals. It will use the complete properties of images to check if each image is loaded. If the number of loaded images equals the total number of images, it means that we are done preloading.

What could be useful is to automatically add the images used for animations to the preload list. To do this, we just need to add three lines at the end of the animation object in the following way:

gf.animation = function(options) { var defaultValues = { url : false, width : 64, numberOfFrames : 1, currentFrame : 0, rate : 30 }; $.extend(this, defaultValues, options); if(this.url){ gf.addImage(this.url); } }

Initializing the game

The framework part of the game is done. Now we want to implement the graphics and game logic. We can divide the game's code into two parts, one that will be executed only once at the beginning, and one that will be called periodically. We will call the first one the initialization.

This part should be executed as soon as the images are done loading; this is the reason why we will pass it as the end callback for the startPreloading function. This means that at the very beginning we need to add all the images that we will use to the preload list. Then once the user launches the game (for example, by clicking an image with the ID startButton) we will call the preloader.

The following code uses the standard jQuery way to execute a function once the page is ready. I won't give you the complete code here because some of it is quite repetitive, but I will give at least one example of each of the actions performed here and you can always look at the complete source code if you're curious.

$(function() { var backgroundAnim = new gf.animation({ url : "back.png" }); var networkPacketsAnim = new gf.animation({ url : "packet.png" }); var bugsAnim = new gf.animation({ url : "bug.png" }); var playerAnim = new gf.animation({ url : "player.png" }); var initialize = /* we will define the function later */ $("#startButton").click(function() { gf.startPreloading(initialize); }); });

The following is a list of what we need to do in the initialize function:

  • Create the sprites that compose the game scene
  • Create the GUI elements

The following diagram shows how we will build our game scene:

No more than eight sprites: one for the background, one for the player, three for the network packets, and three for the bugs. To make things simpler we will use only one sprite for each band of packets/bugs. The three bands of packets will have the same animation and the same for the three bands of bugs.

To avoid making the elements pop up as they are added, we will first add them to an invisible element and make this element visible only once all the sprites are created.

The only GUI element will be a small div containing the number of lives the player has.

var initialize = function() { $("#mygame").append("<div id='container' style='display: none; width: 640px; height: 480px;'>"); gf.addSprite("container","background",{width: 640, height: 480}); gf.addSprite("container","packets1",{width: 640, height: 40, y: 400}); /* and so on */ gf.addSprite("container","player",{width: 40, height: 40, y: 440, x: 260}); gf.setAnimation("background", backgroundAnim); gf.setAnimation("player", playerAnim); gf.setAnimation("packets1", networkPacketsAnim); /* and so on */ $("#startButton").remove(); $("#container").append("<div id='lifes' style='position: relative; color: #FFF;'>life: 3</div>").css("display", "block"); setInterval(gameLoop, 100); }

The last line of this function is starting the main loop. The main loop is the code that will be executed periodically. It contains most (if not all) of the game logic that doesn't immediately depend on an input from the player.

jQuery Game Development Essentials Learn how to make fun and addictive multi-platform games using jQuery with this book and ebook.
Published: April 2013
eBook Price: $26.99
Book Price: $44.99
See more
Select your format and quantity:

Main loop

The main loop will typically contain a finite state machine (FSM). An FSM is defined by a series of states and the list of transitions from one state to another. The FSM for a simple game where the player would have to click three boxes that appear one after the other would look like the following diagram:

When you implement an FSM, you really need to consider two things: how the game should behave in each state, and what conditions make the game transition to a new state. The advantage of FSMs is that they provide a formal way to organize your game logic. It will make it easier to read your code and you can add/or change your logic at a later time if you need it. I would recommend you to first draw the FSM for your game and keep it somewhere to help you debug your game.

For our Frogger game there are 10 states. The initial state is START and the two final states are GAMEOVER and WON. Here is a description of what happens exactly in each state:

  • All states: The packets and bugs move to the right
  • STARTPOS:Nothing special happens
  • LINE1: The player moves at the same speed as the packets of the first line; if the player goes out of the screen it dies and goes back to START
  • LINE2: The player moves at the same speed as the packets of the second line, if the player goes out of the screen it dies and goes back to START
  • LINE3: The player moves at the same speed as the packets of the third line, if the player goes out of the screen it dies and goes back to STARTm
  • REST: Nothing special happens
  • LINE4: If the player gets hit by a bug from the line, it dies and goes back to REST
  • LINE5: If the player gets hit by a bug from the line, it dies and goes back to REST
  • LINE5: If the player gets hit by a bug from the line, it dies and goes back to REST
  • WON and GAMEOVER: Nothing special happens

On all states except WON and GAMEOVER the player can move around. This will trigger the following transitions:

  • Successful jump: Go to the next state
  • Successful left/right slide: Stay in the same state
  • Failed jump of left/right slide: If the number of remaining lives is greater than zero, go back to the last "safe" state (START or REST), otherwise transition to GAMEOVER

Main loop implementation

The most readable way to write an FSM is to use switch statements. We will use two, one in the main loop to update the game, and the other in the part that handles keyboard input.

The following code is an extract of the main loop. We first initiate a few variables that we will need to define the behavior of the game, and then code the FSM described in the preceding section. To move the packets and bugs we will use a trick and simply change the background-position. This is a less flexible solution than the function that we wrote earlier, but in this situation it is faster and makes it easy to give the impression of an infinite number of elements with a single sprite.

var screenWidth = 640; var packets1 = { position: 300, speed: 3 } /* and so on */ var gameState = "START"; var gameLoop = function() { packets1.position += packets1.speed; $("#packets1").css("background-position",""+ packets1.position +"px 0px"); /* and so on */ var newPos = gf.x("player"); switch(gameState){ case "LINE1": newPos += packets1.speed; break; case "LINE2": newPos += packets2.speed; break; case "LINE3": newPos += packets3.speed; break; } gf.x("player", newPos); };

At this point, the game displays all the moving parts. There still isn't any way for the player to control its avatar. To do this we will use the keydown event handler. We will implement two different solutions to move the sprite around. For the horizontal movement, we will use the gf.x function that we wrote earlier. This makes sense because it's a very small movement, but for the vertical jump we will use $.animate to make the avatar move to its destination in many steps and create a more fluid movement.

$(document).keydown(function(e){ if(gameState != "WON" && gameState != "GAMEOVER"){ switch(e.keyCode){ case 37: //left gf.x("player",gf.x("player") - 5); break; case 39: // right gf.x("player",gf.x("player") + 5); break; case 38: // jump switch(gameState){ case "START": $("#player").animate({top: 400},function() { gameState = "LINE1"; }); break; case "LINE1": $("#player").animate({top: 330},function() { gameState = "LINE2"; }); break; /* and so on */ case "LINE6": $("#player").animate({top: 0},function(){ gameState = "WON"; $("#lifes").html("You won!"); }); break; } } } });

Here we start to check the state of the game to be sure that the player is allowed to move. Then we check which key was pressed. The left and right parts are self-explanatory, but the jump part is subtler.

We need to check the state of the game to find out where the player should jump. Then we use a callback that we pass to the animate function in order to update the state of the game only once the animation is done.

That's it, you can now control the player. If you jump on a packet the player will move with it, and when you reach the end you will win the game. However, you may have noticed we forgot something important: there is no way for the player to die! To add this feature we will need to detect whether the player is at a place that is safe or not.

Collision detection

We will use some sort of collision detection, but a very simple version that is designed only for this situation.

There are six spots where collision detection matters in this game; the three lines of packets in the first part, and the three lines of bugs in the second part. Both represent the exact same situation. There is a succession of elements separated by some empty space. The distance between each element is constant along with its size. We don't need to know on which packet the player has jumped or which bugs hit the player, what matters is only if the player stands on a packet or if he/she was hit by a bug.

For this reason we will use the modulo technique we used before to reduce the problem complexity. What we will consider is the following situation:

To know if the player touches the element or not we just need to compare its x co-ordinate with the element position.

The following code does just that. First, it checks the game state to know what collision to detect (if any), then uses modulo to bring the player back to the simplified situation we want to consider. And finally, it checks the coordinates of the player.

var detectSafe = function(state){ switch(state){ case "LINE1": var relativePosition = (gf.x("player") - packets1. position) % 230; relativePosition = (relativePosition < 0) ? relativePosition + 230: relativePosition; if(relativePosition > 110 && relativePosition < 210) { return true; } else { return false; } break; /* and so on */ case "LINE4": var relativePosition = (gf.x("player") - bugs1.position) % 190; relativePosition = (relativePosition < 0) ? relativePosition + 190: relativePosition; if(relativePosition < 130) { return true; } else { return false; } break; /* and so on */ } return true; }

There is one small thing you have to be careful about: modulo can have a negative value. This is why we check for this and simply add the width of the repeating part to go back to a positive value.

This is a pretty fast way to detect the solution and there are many such cases where you can design your own collision detection and make it very efficient because you know exactly what to check in your particular situation.

Now we can call this method in our game. There are two places where this should be done: in the main loop and in the input handler. When we detect that the player died, we need to decrease its life and move it to the right place. Furthermore, we want to detect that the player has no more life and change the game's state to GAMEOVER in this situation. The following function does just that:

var life = 3; var kill = function (){ life--; if(life == 0) { gameState = "GAMEOVER"; $("#lifes").html("Game Over!"); } else { $("#lifes").html("life: "+life); switch(gameState){ case "START": case "LINE1": case "LINE2": case "LINE3": gf.x("player", 260); gf.y("player", 440); gameState = "START"; break; case "REST": case "LINE4": case "LINE5": case "LINE6": gf.x("player", 260); gf.y("player", 220); gameState = "REST"; break; } } }

Now we can add the collision detection in the main loop. We will need to check for another thing: the player shouldn't go out of the screen in one of the packets.

var newPos = gf.x("player"); switch(gameState){ case "LINE1": newPos += packets1.speed; break; /* and so on */ } if(newPos > screenWidth || newPos < -40){ kill(); } else { if(!detectSafe(gameState)){ kill(); } gf.x("player", newPos); }

In the input handler, we will add the code into the callback executed at the end of the jump animation. For example, to check collision for a jump from the start to the first line we will write the following:

case "START": $("#player").animate({top: 400},function(){ if(detectSafe("LINE1")){ gameState = "LINE1"; } else { kill(); } }); break;

Here you see why we didn't use gameState in the kill function. In this situation, the player is still in its previous state. It still hasn't "landed" so to say. Only if the jump was safe, we will change the player's state to the next line.


We now have a game that completely implements the specification that we defined at the beginning of the article. To make a game that is nice to play it would really need more polish. You could add a high-score system, integration with social networks, and sound and touch device compatibility.

Resources for Article :

Further resources on this subject:

About the Author :

Selim Arsever

Selim Arsever is a Senior Software Engineer working as a consultant in Switzerland. Over the last 4 years, he has been developing gameQuery (, an open source game engine based on jQuery, as well as other JavaScript games and demos. He has been giving several talks on the subject and thinks that there is nothing more interesting than using tools beyond what they were initially intended for. You can follow him on twitter at @SelimArsever.

Books From Packt

Instant jQuery UI Starter [Instant]
Instant jQuery UI Starter [Instant]

 Instant Migration to HTML5 and CSS3 How-to [Instant]
Instant Migration to HTML5 and CSS3 How-to [Instant]

jQuery for Designers: Beginner’s Guide
jQuery for Designers: Beginner’s Guide

 jQuery 1.4 Animation Techniques: Beginners Guide
jQuery 1.4 Animation Techniques: Beginners Guide

jQuery Hotshot
jQuery Hotshot

Responsive Web Design by Example
Responsive Web Design by Example

Responsive Web Design with HTML5 and CSS3
Responsive Web Design with HTML5 and CSS3

 jQuery UI 1.8: The User Interface Library for jQuery
jQuery UI 1.8: The User Interface Library for jQuery

Your rating: None Average: 3 (2 votes)

Post new comment

This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Enter the code without spaces and pay attention to upper/lower case.
Code Download and Errata
Packt Anytime, Anywhere
Register Books
Print Upgrades
eBook Downloads
Video Support
Contact Us
Awards Voting Nominations Previous Winners
Judges Open Source CMS Hall Of Fame CMS Most Promising Open Source Project Open Source E-Commerce Applications Open Source JavaScript Library Open Source Graphics Software
Open Source CMS Hall Of Fame CMS Most Promising Open Source Project Open Source E-Commerce Applications Open Source JavaScript Library Open Source Graphics Software